Electronic Components Categories
-
Connector (49)
-
Converter (14)
-
Display&light (23)
-
Electronic Accessories & Supplies (4)
-
Fuse (20)
-
Heatspreader (1)
-
Module (108)
-
Motor (13)
-
Other Electronic Components (38)
-
Passive Components (19)
-
Relay (1)
-
Resistor (9)
-
Rubber (3)
-
Sensor (48)
-
Switch (37)
-
Telecommunications (4)
-
Transmitter (23)
-
Vibration motor (6)
Electronic Components
Showing 1–24 of 422 results
-
Electronic Components, Rubber
Burr killer – IZUSHI AND CO.,LTD.
Eliminate secondary burr problems! Rubber grindstones also shorten the finishing process – Burr Killer
Drastically reduces secondary burrs! Burr Killer, an elastic rubber grindstone that cuts down on finishing work
Burr Killer is an elastic ceramic rubber grindstone that produces almost no secondary burrs.
SKU: n/a -
Display&light, Electronic Components
High CRI LED Tube Lights – High CRI: LED Tubes Adjustable & Non adjustable Models – Intexs Corporation
Display&light, Electronic ComponentsHigh CRI LED Tube Lights – High CRI: LED Tubes Adjustable & Non adjustable Models – Intexs Corporation
Two Models available is only by Intexs
- Premium (Ra98P) and Standard (Ra98PG) Only Intexs Available
- Meet u’ and v’ value upon customer request for Both P and PG
- Availability on high CRI or on Metamerism Index
- Direct replacement or Fabricated fixing
- Adjustable capability on 98P after 2years for tunimg
SKU: n/a -
Display&light, Electronic Components
High Lumen Plant Grow Light – Hi Lumen Plant Growing Lamp – Intexs Corporation
Display&light, Electronic ComponentsHigh Lumen Plant Grow Light – Hi Lumen Plant Growing Lamp – Intexs Corporation
IP67 type, lowend high quality LED tubes
Standard model : 4000 with/without 660nm-RED are also available
High efficiency LED chip(190lm), with back mirror type 60% brightness up compare with old version(Intexs Data)
Lower electric power and achieved 4100lm=1200mm length Lower power energy to get maximum efficiencySKU: n/a -
-
Display&light, Electronic Components
Semiconductor Lamp – Semiconductor Lamp – Intexs Corporation
Optimal lighting for processes that use photoresist, such as clean rooms in semiconductor factories.
An LED lamp that cuts short wavelengths of 500 nm or less, including ultraviolet rays.
New Yellow（NY）, 500nm or less cut product：Alternative to conventional yellow fluorescent tubes
New White（NW）, Pure White（PW), For i-line exposure process
Can also be used in some g-line exposure processes
There are also effects other than energy saving, such as improved color visibility*Explosion-proof lamps cannot be used outside of Japan because of Japanese specifications.
SKU: n/a -
Display&light, Electronic Components
UV Fluorescent Lamp Replacement Solution(LED Type) – Proposal Substitution Traditional UV fluorescent Lamps – Intexs Corporation
Display&light, Electronic ComponentsUV Fluorescent Lamp Replacement Solution(LED Type) – Proposal Substitution Traditional UV fluorescent Lamps – Intexs Corporation
It contains ultraviolet rays that insects perceive as light. A lamp that attracts insects.（Used as an UV Lamp for Insects）
Anti-Insect Lamp
It cuts out the wavelengths that insects perceive as light. Insects don’t think light, so they don’t come near.SKU: n/a -
Display&light, Electronic Components
UV Insect Trap – Trap KING- Excellent Insect Trap – Intexs Corporation
Display&light, Electronic ComponentsUV Insect Trap – Trap KING- Excellent Insect Trap – Intexs Corporation
It contains ultraviolet rays that insects perceive as light. A lamp that attracts insects.（Used as an UV Lamp for Insects）
It is an insect trap using a UV LED straight tube light source
SKU: n/a -
Electronic Components, Fiber Optic Equipment, Telecommunications
1D Fiber Array – Orbray Co. Ltd.
Devices for connection to Optical Waveguide (OWG), Laser, sensors, and others.
Optical Fiber Arrays are devices used for Coherent Optical Communication Systems by connecting and coupling fibers to optical waveguide devices.
The array products position the optical fiber cores with precision and accuracy within the V-Groove Blocks by an ultra precision processing technolo-gy. The process requires accuracy on a submicron level in order to reduce the connection loss.
In addition, we also offer a unique, high density and accurate optical lead frame which is a low loss, high-reliability narrow pitch array which enables direct fiber coupling of high-density array devices of LDs and PD Waveguides.SKU: n/a -
-
Electronic Components, Motor
2 phase hybrid stepper motor 42D series – ASPINA
□42mm (NEMA17), 1.8° step angle, unipolar/bipolar
Compact and powerful stepper motor that fits various applications including indusrial autionation equipment, printing/scanning machines, medical/laboratory machines. RoHS compliant.
SKU: n/a -
Electronic Components, Motor
2 phase hybrid stepper motor 43D series – ASPINA
□42mm (NEMA17), 1.8° step angle, unipolar/bipolar
Compact and powerful stepper motor that fits various applications including indusrial automation equipment, sensing/scanning devices, medical/laboratory machines. RoHS compliant.
SKU: n/a -
Electronic Components, Motor
2 phase hybrid stepper motor 56D series – ASPINA
□56mm (NEMA23), 1.8° step angle, unipolar/bipolar
Compact and powerful stepper motor that fits various applications including printing/scanning machines, medical/laboratory machines, indusrial automation equipment. RoHS compliant.
SKU: n/a -
Electronic Components, Motor
2 phase hybrid stepper motor 59D series – ASPINA
56mm (NEMA23), 1.8° step angle, unipolar/bipolar
Compact and powerful stepper motor that fits various applications including indusrial automation equipment, printing/scanning machines, medical/laboratory machines. RoHS compliant.
SKU: n/a -
Electronic Components, Module
2-FSK or LoRa mode Low Power Long Range Radio Modem SLR-434M – Circuit Design Inc.
Electronic Components, Module2-FSK or LoRa mode Low Power Long Range Radio Modem SLR-434M – Circuit Design Inc.
434 MHz embedded radio modem for data transmission up to a few km or more
The SLR-434M smart modem is a compact and easy-to-use embedded radio modem operating in the 434 MHz ISM band. It allows for conventional FSK mode communication and also communication using LoRa® mode, providing long range at a lower bit rate.
With its high receiving sensitivity, it is possible to transmit up to a few kilometers or more with line of sight using low RF output power.
By connecting to an external CPU or PC with a UART interface, the user can send data or design simple control systems using Circuit Design’s dedicated command protocol for industrial applications. It is also possible to process up to eight switching signals.
Applications include data transmission, telemetry, and telecontrol.
* Under certain conditions, when LoRa modulation is used in conjunction with a low data rate, higher sensitivity is achieved and longer range becomes possible. When used in conventional FSK mode, up to 600 m (LOS) range should be expected.
The SLR-434M contains a Semtech’s LoRa® wireless RFIC.
The LoRa® Mark and LoRa Logo are trademarks of Semtech Corporation.SKU: n/a -
Connector, Electronic Components
20A Current, Compact, Waterproof Power/Signal Hybrid Connector BH12-P-213 – Hirose Electric Co. Ltd.
Connector, Electronic Components20A Current, Compact, Waterproof Power/Signal Hybrid Connector BH12-P-213 – Hirose Electric Co. Ltd.
The BH12 Series is a power/signal hybrid connector ideal for the battery connection of micro-mobility applications.BH12 can also be used in other industrial applications as well. The BH12 Series is an IPX6/IPX7 waterproof connector(when mated) with lock lever design and enhances cable wiring efficiency. Additionally, the power/signal hybrid designcontributes to reducing connector occupied mounting space.
20A Current, Compact, Waterproof Power/Signal Hybrid Connector
SKU: n/a -
Display&light, Electronic Components
42V terrestrial, BS, 110 degrees, CS digital full HD LCD TV “SQ-Y42M” – SK JAPAN Co. Ltd.
Display&light, Electronic Components42V terrestrial, BS, 110 degrees, CS digital full HD LCD TV “SQ-Y42M” – SK JAPAN Co. Ltd.
FULL HD compatible! A dual-tuner LCD TV that can record programs on other channels.
Simple & slim design with FULL HD support
Slim design with LED backlight!
You can record counter programs while watching TV!SKU: n/a
Are you looking for a Electronic Components product?
When selecting Electronic Components for your company’s needs, there are several important points to consider during the comparison and evaluation process.
1. Performance and Specifications
Compare the performance specifications of different Electronic Components. Look at parameters such as speed, power consumption, operating temperature range, and other technical characteristics to ensure they meet your application requirements.
2. Quality and Reliability
Assess the quality and reliability of the components. Look for reputable brands and manufacturers known for producing reliable and long-lasting electronic products.
3. Compatibility
Ensure the selected electronic components are compatible with your existing systems or other components they need to interface with.
4. Environmental Considerations
Check if the components meet environmental regulations, such as RoHS compliance, and are suitable for the operating conditions they will be exposed to.
5. Long-Term Availability
Consider the long-term availability of the components. Choose products that will remain accessible for an extended period to support your production and maintenance needs.
6. Pricing and Total Cost of Ownership (TCO)
Compare the prices of different components and consider the total cost of ownership, including maintenance, support, and possible future upgrades or replacements.
7. Technical Support and Documentation
Research the manufacturer’s reputation for technical support and the availability of comprehensive documentation and resources for their products.