Other Electronic Components
Showing 1–24 of 38 results
-
Electronic Components, Other Electronic Components
AION PVA Sponge Rollers – AION Co.Ltd.
Utilized for many years in a variety of industries, our PVA sponge rollers are valued for their outstanding moisture-wicking capability and drying performance.
In addition to enabling continuous moisture wicking with simple machinery for pressing the sponge rollers against and rotating them over the work, leaving little water remaining, they enable reducing the amount of heat during drying. What’s more, our PVA sponge rollers make it possible to wash off/eliminate microscopic foreign matter without damaging the work.
SKU: n/a -
Electronic Components, Other Electronic Components
Air Filter – AION Co.Ltd.
We’ve made AION’s A series sponges, with their superior filtration precision and enhanced porosity, the principal filtration medium in our air filters, for enhanced trapping efficiency with low pressure drop, as well as recyclability/cleanability.
Since we’ve made the our A series sponges, with their porosity of about 90% and their microfine reticulated-foam structure, the principal filtration medium, our air filters are low-pressure-drop, high-trapping-efficient.
The filtration media excel in water resistance, and being mechanically strong and washable/recyclable are long-life and economical.SKU: n/a -
Electronic Components, Other Electronic Components
Alcohol checker “SKJ-AL001JP” – SK JAPAN Co. Ltd.
From October 2022, driving a company carwill be obliged to check if you are drunk with an alcohol detector.
Business establishments using 5 or more company cars or 1 or more company cars with a capacity of 11 or more people are eligible.
- Before and after driving, check whether you are under the influence of alcohol visually or by using an alcohol detector.
- It is necessary to keep a record of confirmation by visual inspection and alcohol detector for one year.
- Always have a functioning breathalyzer.
Introducing the SKJ-AL001JP series of easy-to-carry alcohol checkers!
SKU: n/a -
Electronic Components, Other Electronic Components
ATEX In-Situ Zirconia Oxygen Analyzers – FUJI ELECTRIC CO. LTD.
Electronic Components, Other Electronic ComponentsATEX In-Situ Zirconia Oxygen Analyzers – FUJI ELECTRIC CO. LTD.
Optimization of combustion efficiency and compliance with environmental standards.
Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the combustion exhaust gas of industrial boilers or furnaces. This is ideally suited for combustion management and control, such as garbage incinerators and smallest to largest sized boilers. Our products are combustion controllers which achieve significant energy-saving effect.
SKU: n/a -
Electronic Components, Other Electronic Components
Cleaning Material for Wafer Chuck TableCleaning Wafer™ – Nitto Denko Corporation
Electronic Components, Other Electronic ComponentsCleaning Material for Wafer Chuck TableCleaning Wafer™ – Nitto Denko Corporation
The Cleaning Wafer is for removing small particles on the robot arms or chuck tables of semiconductor-manufacturing equipment.
The Cleaning Wafer, having a special cleaning layer, can remove small particles in the semiconductor manufacturing equipment. Down-time of tools can be drastically reduced by using the cleaning wafer, compared with the ordinal hand cleaning method. The cleaning wafer can also be used for preventive maintenance so that yield improvement can be expected.
SKU: n/a -
-
Electronic Components, Other Electronic Components
Cutter for steel processing – FUKUDA HAMONO
We have a lot of experience in manufacturing general shear blades as well as flying shear blades and other special blades.
Steel cutting with blades often employs shearing (shearing) with upper and lower blades and cutting with saw blades.
SKU: n/a -
Electronic Components, Other Electronic Components
DCS-1000B Series Digital Storage Oscilloscope – TEXIO TECHNOLOGY CORPORATION.
Electronic Components, Other Electronic ComponentsDCS-1000B Series Digital Storage Oscilloscope – TEXIO TECHNOLOGY CORPORATION.
10M Point/ch Long memory, 1GS/s Sampling , 7inches WVGA LCD Digital Storage Oscilloscope
- 100MHz/70MHz/50MHz Digital Storage Oscilloscope
- Waveform update rate up to 50,000wfms/s
- 256 color gradient 7inches WVGA display
- 10M memory depth per channel independently
- 1M FFT mathematical sampling analysis mode
- Zoom In/Play and Pause Function
- Diversified Trigger Functions
- X-Y Mode Display
- Go/NoGo Function
- Data Log Function
- Digital Filter Function
- 36 Measurement Parameter Selections
SKU: n/a -
Electronic Components, Other Electronic Components
Die Attach Film with Pressure Sensitive Dicing TapeELEP MOUNT™ (EM Series) – Nitto Denko Corporation
Electronic Components, Other Electronic ComponentsDie Attach Film with Pressure Sensitive Dicing TapeELEP MOUNT™ (EM Series) – Nitto Denko Corporation
Achieves high reliability by combining dicing and die attachment functions.
This adhesive film is for fixing IC chips to a lead frame or interposer in the semiconductor assembly process. It is useful in realizing high adhesive reliability and in BOC and stacked CSP manufacturing processes, solving conventional silver paste bleeding problems which cause short circuits. It has also been designed to enable use in a continuous process in combination with fixing tape for dicing.
SKU: n/a -
Electronic Components, Other Electronic Components
EtherCAT EC-AD series – Nippon Pulse Motor Co. Ltd.
Electronic Components, Other Electronic ComponentsEtherCAT EC-AD series – Nippon Pulse Motor Co. Ltd.
Nippon Pulse Motor offers EC-AD series drivers supporting EtherCAT, CiA402 drive profile and PP mode.
The drivers are capable of DC(Distributed Clock) synchronization: high-speed response at 250 μs cycle time.
SKU: n/a -
Electronic Components, Other Electronic Components
Flow Meters for Fluid – FUJI ELECTRIC CO. LTD.
Fuji Electric delivers high performance ultrasonic Flow Meters to optimized for 0.5-inch to 234-inch pipe diameters.
The portable ultrasonic flow meter is ideal for flow surveys, verifications, and energy/BTU measurements. The fixed unit offers high performance measurement in a versatile and easy to setup package. The Duosonics model is a hybrid pulse doppler-transit time unit for irregular profiles, non-Newtonian flows, and applications lacking sufficient upstream/downstream straight run mounting requirements.
SKU: n/a -
Electronic Components, Other Electronic Components
GLASS FIBER EPOXY RESIN LAMINATED BOARD – YUTAKA CORPORATION
Electronic Components, Other Electronic ComponentsGLASS FIBER EPOXY RESIN LAMINATED BOARD – YUTAKA CORPORATION
GLASS FIBER EPOXY RESIN LAMINATED BOARD has excellent electrical insulation performance, moisture resistance, dimensional stability, chemical resistance, adhesion properties, and especially alkaline resistance.
GLASS FIBER EPOXY RESIN LAMINATED BOARD is the material with the highest strength among FRP (Fiber Reinforced Plastics).
It has high strength and can be used as a structural material.
SKU: n/a -
Electronic Components, Other Electronic Components
Heat Insulation Board MIOLEX PGX-595 – YUTAKA CORPORATION
Electronic Components, Other Electronic ComponentsHeat Insulation Board MIOLEX PGX-595 – YUTAKA CORPORATION
MIOLEX PGX-595 is a rigid heat insulation board made by laminating glass fiber sheets and hardening them with an inorganic binder.
It has high strength and can be used as a structural material.
Since it does not contain asbestos, it can be used as a replacement for asbestos cement board.SKU: n/a -
Electronic Components, Other Electronic Components
Heat Insulation Board MIOLEX PMX-561 – YUTAKA CORPORATION
Electronic Components, Other Electronic ComponentsHeat Insulation Board MIOLEX PMX-561 – YUTAKA CORPORATION
MIOLEX PMX-561 is a rigid heat insulation board made by laminating glass fiber sheets and hardening them with an inorganic binder.
It has high strength and can be used as a structural material.
Since it does not contain asbestos, it can be used as a replacement for asbestos cement board.SKU: n/a -
Electronic Components, Other Electronic Components
Heat Insulation Board MIOLEX PMX-573 – YUTAKA CORPORATION
Electronic Components, Other Electronic ComponentsHeat Insulation Board MIOLEX PMX-573 – YUTAKA CORPORATION
MIOLEX PMX-573 is a rigid heat insulation board made by laminating glass fiber sheets and hardening them with an inorganic binder.
It has high strength and can be used as a structural material.
Since it does not contain asbestos, it can be used as a replacement for asbestos cement board.SKU: n/a -
Electronic Components, Other Electronic Components
Heat Resistance Back Grinding Tape – Nitto Denko Corporation
Electronic Components, Other Electronic ComponentsHeat Resistance Back Grinding Tape – Nitto Denko Corporation
Back-grinding tape with heat resistance is for special heating process after wafer grinding.
Heat resistance back grinding tape can correspond to the secondary process of wafer backside. After the back-grinding process, the wafers with the heat resistance back grinding tape can be processed (wet etching, ashing, metalizing, exposure/processing and so on).
SKU: n/a -
Electronic Components, Other Electronic Components
Heat-resistant Low Adhesion SheetPW(PROSS WELL) / TRM Series – Nitto Denko Corporation
Electronic Components, Other Electronic ComponentsHeat-resistant Low Adhesion SheetPW(PROSS WELL) / TRM Series – Nitto Denko Corporation
Outstanding heat resistance can be used in various applications.
PW/TRM series are products which combines Nitto Denko’s advanced adhesion controlled technology with heat resistant base materials and adhesives, and is applied in various electronic components and device processes. With the wide variety of outstanding heat resistant characteristics, PW/TRM series can be applied to temporary fixing and masking in heating processes, and can be used for protection and transport of film components. The adhesives can be chosen from acrylic-based adhesives and other silicon-based adhesives, suitable for heating applications, to meet customer needs.
SKU: n/a -
Electronic Components, Other Electronic Components
NPA PMX series – Nippon Pulse Motor Co. Ltd.
Box Level Controllers
Nippon Pulse now offers even more options for control, with new advanced box controllers. These high-performance motion controllers can control up to four axes of movement in a convenient all-in-one package.
SKU: n/a -
Electronic Components, Other Electronic Components
PFR-100 Series – TEXIO TECHNOLOGY CORPORATION.
Fanless & Multi Range DC Power Supplies
The PFR-100 series is a power supply with fanless, a fve-fold rated power that allows users to self-defne voltage and current under rated power conditions.
SKU: n/a -
Electronic Components, Other Electronic Components
Power Supplies – UPS6000D-1 Series – FUJI ELECTRIC CO. LTD.
Electronic Components, Other Electronic ComponentsPower Supplies – UPS6000D-1 Series – FUJI ELECTRIC CO. LTD.
Configuration of up to 8 parallel systems possibleOnline UPS systemSingle-phase, 20 to 75 kVA
Flexible support for AC output and direct feed input in the same equipment dimensions is possible with the large number of single-phase specification variations. Elimination of a voltage matching transformer improves the efficiency of the whole system.
SKU: n/a -
Electronic Components, Other Electronic Components
Power Supplies – UPS7100MX-T3 Series – FUJI ELECTRIC CO. LTD.
Electronic Components, Other Electronic ComponentsPower Supplies – UPS7100MX-T3 Series – FUJI ELECTRIC CO. LTD.
About a 40% reduction in device mass compared to previous modelsOn-line type UPSThree-phase, 30 to 100 kVA
Utilization of device technologies reduces equipment mass
Utilization of 3-level modules with RB-IGBTs and conventional IGBTs in one package to simplify the circuit configuration as well as miniaturization of filters have reduced the mass of the equipment by about 40% compared with our conventional models.SKU: n/a -
Electronic Components, Other Electronic Components
PS-A / PS-AR Series Regulated DC Power Supplies – TEXIO TECHNOLOGY CORPORATION.
Electronic Components, Other Electronic ComponentsPS-A / PS-AR Series Regulated DC Power Supplies – TEXIO TECHNOLOGY CORPORATION.
Four digits LED displayThe high resolution display can indicate output voltage and current and power value. Voltage and current values can be easy to set with “digit key” by selecting a digit to be changed.
Three points preset memory function
Possible to preset three kinds of voltage and current values inside for easy reading of setting values.SKU: n/a
Are you looking for a Other Electronic Components product?
When selecting Other Electronic Components for your company’s needs, there are several important points to consider during the comparison and evaluation process.
1. Quality and Reliability
Ensure the electronic component meets high-quality standards and reliability requirements to avoid malfunctions or failures in the manufacturing process.
2. Compatibility
Check compatibility with existing equipment, systems, and protocols to ensure seamless integration and interoperability.
3. Performance
Evaluate the component’s performance metrics such as speed, accuracy, response time, and signal integrity to meet operational needs.
4. Cost-effectiveness
Compare initial purchase costs, total cost of ownership, and potential returns on investment to determine long-term affordability.
5. Supplier Reputation
Research the reputation, reliability, and track record of the supplier in delivering high-quality electronic components and providing excellent customer support.