Module
Showing 1–24 of 107 results
- Electronic Components, Module
2-FSK or LoRa mode Low Power Long Range Radio Modem SLR-434M – Circuit Design Inc.
Electronic Components, Module2-FSK or LoRa mode Low Power Long Range Radio Modem SLR-434M – Circuit Design Inc.
434 MHz embedded radio modem for data transmission up to a few km or more
The SLR-434M smart modem is a compact and easy-to-use embedded radio modem operating in the 434 MHz ISM band. It allows for conventional FSK mode communication and also communication using LoRa® mode, providing long range at a lower bit rate.
With its high receiving sensitivity, it is possible to transmit up to a few kilometers or more with line of sight using low RF output power.
By connecting to an external CPU or PC with a UART interface, the user can send data or design simple control systems using Circuit Design’s dedicated command protocol for industrial applications. It is also possible to process up to eight switching signals.
Applications include data transmission, telemetry, and telecontrol.
* Under certain conditions, when LoRa modulation is used in conjunction with a low data rate, higher sensitivity is achieved and longer range becomes possible. When used in conventional FSK mode, up to 600 m (LOS) range should be expected.
The SLR-434M contains a Semtech’s LoRa® wireless RFIC.
The LoRa® Mark and LoRa Logo are trademarks of Semtech Corporation.SKU: n/a - Electronic Components, Module
6 input/output switching signals Telecommand Transmitter and Receiver KST/R 2.4 – Circuit Design Inc.
Electronic Components, Module6 input/output switching signals Telecommand Transmitter and Receiver KST/R 2.4 – Circuit Design Inc.
2.4 GHz FCC Part 15 certified radio units for operation of agricultural machinery
The “KST2.4S” is a 6-contact input unit that wirelessly transmits external contact (on/off) signals. The input voltage ranges from 6 to 24 VDC, while the operating voltage is between 6 and 24 VDC. When combined with the “KSR2.4” 6-contact output unit, which has momentary, toggle, and one-shot output modes, communication over a distance of 50 to 100 m can be achieved in less than 70 ms.
SKU: n/a - Electronic Components, Module
8 on/off switching signals Telecommand module NK-2.4Y – Circuit Design Inc.
Electronic Components, Module8 on/off switching signals Telecommand module NK-2.4Y – Circuit Design Inc.
2.4 GHz FCC Part 15 certified embedded radio module for shutter open-close control switch
The NK-2.4Y is a 2.4 GHz embedded telecommand module that can transmit 8 on/off switching signals incorporating CRC-16 error detection for error-free communication. A Hamming distance of 6 helps to minimize any malfunctions.
By setting one module as input mode and another as output mode, it is possible to drive a maximum of eight outputs from eight inputs. For example, you can connect switches/buttons to the input module and control relays or motors at the output module.
The NK-2.4Y switches between transmit and receive rapidly, allowing two-way communication between input and output module to constantly monitor the communication link status. By displaying this link status as an output signal from the module, this will help the user stay within the signal coverage area. Frequency hopping minimizes interference from other nearby radio systems on the 2.4 GHz band. There is no need to manage any channels, and multiple system operation in the same area is possible.
Low voltage and current consumption allow the module to operate on 2 x 1.5 V or 1 x lithium coin battery.
Communication is 1:1 only ((1:N or N:1 not possible).
Note: The external antenna is not included with the NK-2.4Y. If required, please specify the antenna to be used. Refer to the antenna list here.
When the internal pattern antenna is used, please make sure to short the ANT select jumper on the board.
SKU: n/a - Electronic Components, Module
AC Power Cord Retention Clamp ACC2734 (PS2734） – Nipron Co. Ltd.
AC Power Cord Retention Clamp
Features
● It prevents the AC power cord to come off. Also, its structure prevents operational mistakes of a switch.
※ Dedicated to excellent (resin) panel. WH2753 is recommended for an AC power cord.
It may not be able to attach the clamp to an AC power cord on the market.SKU: n/a - Electronic Components, Module
Analog Multi Channel Wireless Audio Transmitter and Receiver WA-TX/RX-03S – Circuit Design Inc.
Electronic Components, ModuleAnalog Multi Channel Wireless Audio Transmitter and Receiver WA-TX/RX-03S – Circuit Design Inc.
863 – 865 MHz multichannel (15 ch) audio modules for wireless microphone systems
The WA-TX-03S / WA-RX-03S are 15-channel multichannel audio modules that operate in the European harmonized 863 – 865 MHz band with RF power selection of 5 and 10 mW.
SKU: n/a - Electronic Components, Module
Automatic synchronizer ASY – Daiichi Electronics Co. Ltd.
Smooth synchronizing
This product is an automatic synchronizer w/ synchronous validation display(LED) used when generators are connected in parallel. Smooth synchronizing can be performed w/ suppressed rush current, less system disturbance, less generator shock by accurate circuit breaker closing at synchronizing point after matching voltage/frequency of both generators.
SKU: n/a - Electronic Components, Module
Battery Package BS05A-P24/2.2L – Nipron Co. Ltd.
5-inch Bay Fixed Type Lead Battery Package
Compatible Power Supply
eNSP-300P series
aNSP3-250P-S20
NSP2-250 series
NSP2-250-F2S
NSP3-150-F2S
cNSP-250-D4S*
vNSP-300P-X4S*
*In case of connecting with cNSP-250-D4S or vNSP-300P-X4S, 2 units of battery packs and connectors are need to be processedFeatures
● Battery with long life expectancy
● Mounted in 5-inch bay
The built-in type battery fits into 5-inch bay size.
No power failure and uninterruptible environment can be installed in the computer system.
● Multiple installation directions
The battery can be installed in both vertical and horizontal directions.
(One of the vertical directions is unacceptable. See “battery installation” below.)SKU: n/a - Electronic Components, Module
Battery Package BS06 Series – Nipron Co. Ltd.
Ni-MH Battery Package, a Substitute for 24V Lead Battery
Compatible Power Supply
eNSP-300P series
aNSP3-250P-S20
NSP2-250 series
NSP2-250-F2S
NSP3-150-F2SFeatures
●5-inch bay embedded type, which is compatible with lead battery package. A lead battery can be replaced with this Ni-MH at maintenance.
● Compared with a lead battery package, this unit has 1.5 times as large discharge time and three times as long life expectancy.
● An embedded heater helps the startup at low temperature and prevents capacity drop.
● Condition of the battery package (charge/backup) can be visible.
● Leakage current prevention circuit is mounted.SKU: n/a - Electronic Components, Module
Battery Package BS10A-H24/2.0L – Nipron Co. Ltd.
300W Min. Large Capacity Ni-MH Battery
Compatible Power Supply
HNSP9-520P series
eNSP3-450P series
mNSP3-450P seriesFeatures
● High capacity Ni-MH battery dedicated to nonstop power supply, eNSP3-450P.
● The embedded heater prevents capacity drop at low temperature.
● Condition of the battery package (charge/backup) is visible.SKU: n/a - Electronic Components, Module
Battery Package BS11A-P24/2.3L – Nipron Co. Ltd.
24V Lead Battery Package
Compatible Power Supply
HNSP9-520P series
eNSP3-450P series
mNSP3-450P seriesFeatures
●Lead battery package
●If a larger capacity and longer backup time are needed, BS12A-P24/5.0L (lead) and BS10A-H24/2.0L (Ni-MH) are recommended.SKU: n/a - Electronic Components, Module
Battery Package BS13A-EC400/422F – Nipron Co. Ltd.
No worry about replacement due to lifetime with this capacitor package!
Compatible Power Supply
eNSP4-500P seriesFeatures
By using electrolytic capacitors, instead of a battery package, the unit has 12 years min. (at 40°C) life expectancy. No need for maintenance.● Advantages of a capacitor package
– Maintenance free (no need for replacement)
– Low and high temperature (0°C to 60°C)
– 2 minutes quick charge (deals with frequent blackout)
– Light 1.4kg typ. (approximately half the weight as
compared to our 5-inch bay embedded type)SKU: n/a - Electronic Components, Module
Battery Package BS14A-H24/2.5L – Nipron Co. Ltd.
Battery Package for GPSA 24V output series
Compatible Power Supply
– OZP-120-24-*B*
– OZP-170-24-*B*
– GPSA-360-24-TP
– GPSA-600-24P-TP
– GPSA-750-24-TP
– mGPSA-360-24-TPFeatures
● Long life as Ni-MH battery is adopted.
● With parallel connection function, multiple batteries can be connected in parallel when capacity is short.
● Discharge halt by Dip switch is available.SKU: n/a - Electronic Components, Module
Battery Package BS17A-H24/2.0L – Nipron Co. Ltd.
3.5-inch Bay Fixed Type Ni-MH Battery
Compatible Power Supply
PCFL-180P-X2S2
PCFD-180P-X2SFeatures
● Ni-MH battery package for fanless power supplies (PCFL-180P-X2S2 and PCFD-180P-X2S).
● Small-scale size that can be fixed to 3.5-inch bay
● With various input/output signals (RS232C signal), BATT OPERATE (AC FAIL), BATT LOW, and SHUT DOWN, it deals with automatic shutdown at blackout.It can be customized to correspond to TTL signal. Consult with us.
Model: BS17A-H24/2.0L-TNote: This battery package is for standby use. If it is used for cycle use, its life span may be shortened. Consult with us if you wish to use it for cycle use.
SKU: n/a - Electronic Components, Module
Battery Package BS19A-P48/5.0L – Nipron Co. Ltd.
Back up two power supply units at the same time！
Applicable power supply
-Desktop PC Power Supply
GNSP3-750-24X05-TRP
GNSP3-750-241205-TRP
GNSP3-750-242405-TRP
GNSP3-750-121205-TRP
GNSP3-1000P-12X05-TRPFeatures
One battery is able to back up 2 units of GNSP series at same time！
Combination is your choice for GNSP series ! (More details for GNSP series are page on C-D2.）
– GNSP3-750-24X05-TRP (24V output + ATX output)
– GNSP3-1000P-12X05-TRP (12V output + ATX output)
– GNSP3-750-Single output (12V output + 12V output) or (24V output +24V output)
– GNSP3-750-241205-TRP (24V output + 12V output)SKU: n/a - Electronic Components, Module
Battery Package RBS01A-P24/2.2L – Nipron Co. Ltd.
Removable Battery Package for Nonstop Power Supply
Compatible Power Supply
eNSP-300P series
aNSP3-250P-S20
NSP2-250 series
NSP2-250-F2S
NSP3-150-F2S
cNSP-250-D4S*
vNSP-300P-X4S*
*In case of connecting with cNSP-250-D4S or vNSP-300P-X4S, 2 units of battery packs and connectors are need to be processed.Features
● Lead battery with long life expectancy
● The unit can be replaced from the front of the PC.
● It can fit into 5-inch bay sizeSKU: n/a - Electronic Components, Module
Beam profiler for large diameter and high-power: LaseView-LHB – Kokyo Inc.
Electronic Components, ModuleBeam profiler for large diameter and high-power: LaseView-LHB – Kokyo Inc.
Equipped with different analysis capabilities, it is a very easy-to-use beam profiler.
LaseView-LHB is a laser beam profiler for large diameter and high power laser beams working on Windows systems.Thanks to a newly-developed optical setup, it is the first product to provide measurements for both large diameter and high power laser beams. This versatile lone product offers a wide range of applications.
It works with the LaseView software, which is known for its great usability.SKU: n/a - Electronic Components, Module
Beam profiler with M2 platform software “LaseView Subscription” – Kokyo Inc.
Electronic Components, ModuleBeam profiler with M2 platform software “LaseView Subscription” – Kokyo Inc.
By using commercially available CCD and CMOS cameras, it is easy to build an extremely low-cost and practical beam measurement system.
Beam profiler with M2 platform software “LaseView” is a highly functional and versatile laser beam profiler software that allows to use commercially available CCD cameras as beam profilers.
SKU: n/a - Electronic Components, Module
Center Hall Thermo-electric Modules – Ferrotec Power Semiconductor Japan Corp.
Are you looking for a module product?
When selecting a module for your company’s needs, there are several important points to consider during the comparison and evaluation process.Common Comparison Points for Any Module
1. Functionality and Compatibility
Determine the specific functionality and compatibility requirements for your application. Identify the features and capabilities you need in a module and ensure compatibility with your existing systems or equipment.
2. Performance Specifications
Evaluate the performance specifications of the module. This includes parameters such as speed, accuracy, resolution, capacity, response time, and signal-to-noise ratio. Compare these specifications with your application requirements to ensure optimal performance.
3. Reliability and Quality
Consider the reliability and quality of the module. Look for modules from reputable manufacturers known for producing reliable and high-quality products. Check for certifications or standards compliance to ensure the module meets industry requirements.
4. Interface and Connectivity
Assess the interface and connectivity options of the module. Determine if it provides the necessary communication protocols, ports, and connectors to integrate with your existing systems or equipment. Consider compatibility with your data acquisition or control systems.
5. Power Requirements
Determine the power requirements of the module, including voltage levels and power consumption. Ensure that the module can be adequately powered and that it aligns with the available power sources in your facility.
6. Size and Form Factor
Evaluate the physical dimensions and form factor of the module. Consider the available space and mounting options in your system or equipment. Choose a module size and form factor that can be easily integrated.