Module
Showing all 20 results
-
Electronic Components, Module
2-FSK or LoRa mode Low Power Long Range Radio Modem SLR-434M – Circuit Design Inc.
Electronic Components, Module2-FSK or LoRa mode Low Power Long Range Radio Modem SLR-434M – Circuit Design Inc.
434 MHz embedded radio modem for data transmission up to a few km or more
The SLR-434M smart modem is a compact and easy-to-use embedded radio modem operating in the 434 MHz ISM band. It allows for conventional FSK mode communication and also communication using LoRa® mode, providing long range at a lower bit rate.
With its high receiving sensitivity, it is possible to transmit up to a few kilometers or more with line of sight using low RF output power.
By connecting to an external CPU or PC with a UART interface, the user can send data or design simple control systems using Circuit Design’s dedicated command protocol for industrial applications. It is also possible to process up to eight switching signals.
Applications include data transmission, telemetry, and telecontrol.
* Under certain conditions, when LoRa modulation is used in conjunction with a low data rate, higher sensitivity is achieved and longer range becomes possible. When used in conventional FSK mode, up to 600 m (LOS) range should be expected.
The SLR-434M contains a Semtech’s LoRa® wireless RFIC.
The LoRa® Mark and LoRa Logo are trademarks of Semtech Corporation.SKU: n/a -
Electronic Components, Module
6 input/output switching signals Telecommand Transmitter and Receiver KST/R 2.4 – Circuit Design Inc.
Electronic Components, Module6 input/output switching signals Telecommand Transmitter and Receiver KST/R 2.4 – Circuit Design Inc.
2.4 GHz FCC Part 15 certified radio units for operation of agricultural machinery
The “KST2.4S” is a 6-contact input unit that wirelessly transmits external contact (on/off) signals. The input voltage ranges from 6 to 24 VDC, while the operating voltage is between 6 and 24 VDC. When combined with the “KSR2.4” 6-contact output unit, which has momentary, toggle, and one-shot output modes, communication over a distance of 50 to 100 m can be achieved in less than 70 ms.
SKU: n/a -
Electronic Components, Module
8 on/off switching signals Telecommand module NK-2.4Y – Circuit Design Inc.
Electronic Components, Module8 on/off switching signals Telecommand module NK-2.4Y – Circuit Design Inc.
2.4 GHz FCC Part 15 certified embedded radio module for shutter open-close control switch
The NK-2.4Y is a 2.4 GHz embedded telecommand module that can transmit 8 on/off switching signals incorporating CRC-16 error detection for error-free communication. A Hamming distance of 6 helps to minimize any malfunctions.
By setting one module as input mode and another as output mode, it is possible to drive a maximum of eight outputs from eight inputs. For example, you can connect switches/buttons to the input module and control relays or motors at the output module.
The NK-2.4Y switches between transmit and receive rapidly, allowing two-way communication between input and output module to constantly monitor the communication link status. By displaying this link status as an output signal from the module, this will help the user stay within the signal coverage area. Frequency hopping minimizes interference from other nearby radio systems on the 2.4 GHz band. There is no need to manage any channels, and multiple system operation in the same area is possible.
Low voltage and current consumption allow the module to operate on 2 x 1.5 V or 1 x lithium coin battery.
Communication is 1:1 only ((1:N or N:1 not possible).
Note: The external antenna is not included with the NK-2.4Y. If required, please specify the antenna to be used. Refer to the antenna list here.
When the internal pattern antenna is used, please make sure to short the ANT select jumper on the board.
SKU: n/a -
-
Electronic Components, Module
Compact Multi Channel Transmitter and Receiver CDP-TX/RX-07M/MP – Circuit Design Inc.
Electronic Components, ModuleCompact Multi Channel Transmitter and Receiver CDP-TX/RX-07M/MP – Circuit Design Inc.
434 / 869 MHz low power narrow band FSK transmitter and receiver for industrial applications
CDP-TX-07M and CDP-RX-07M are low-power, narrowband FSK transmitter and receiver modules, designed for industrial applications operating in the 434 and 869 MHz ISM band.
SKU: n/a -
Electronic Components, Module, Power Supply
Desktop PC Power Supply eNSP4-500P Series – Nipron Co. Ltd.
Electronic Components, Module, Power SupplyDesktop PC Power Supply eNSP4-500P Series – Nipron Co. Ltd.
High-capacity power supply with 1 sec backup time, maintenance-free with capacitor package, noise reduction and thermal-sensing fan, customizable output harnesses, 10-year lifespan.
The eNSP4-500P Series is a high-capacity ATX12V power supply designed for desktop PCs. With a typical output of 180W, it boasts a backup time of 1 second in the event of a blackout, provided a capacitor package is connected. The capacitor package offers several advantages, including no need for maintenance or regular replacement, the ability to adjust to low and high temperatures, and a quick 2-minute charge in the case of frequent blackouts. The power supply is also lightweight, approximately half the weight of a 5-inch bay embedded lead battery. It features an AC_FAIL signal delivered at blackout, a completely independent voltage-stabilizing circuit, and a thermal-sensing variable speed fan for noise reduction and heat-related issues. The power supply is designed to last a minimum of 10 years with continuous rated operation at 45°C, and its output harnesses can be easily customized to meet various requirements. The signal unit and fan are also replaceable.
SKU: n/a -
-
Electronic Components, Module
Miniature Narrow Band Radio Transceiver STD-601 – Circuit Design Inc.
429 / 434 / 447 / 458 MHz transceiver for industrial remote control and telemetry applications
The STD-601 is a miniature transceiver designed for industrial remote control applications, conforming to the EN 300 220 standard.
SKU: n/a -
Electronic Components, Module
Multi Channel Telecommand Transmitter and Receiver CDT-TX-02M-R / CDT-RX-03M – Circuit Design Inc.
Electronic Components, ModuleMulti Channel Telecommand Transmitter and Receiver CDT-TX-02M-R / CDT-RX-03M – Circuit Design Inc.
434 MHz CE certified radio modules for remote control applications
CDT-TX-02M-R and CDT-RX-03M are CE-certified radio modules operating in the 434 MHz ISM band. In addition to the high performance of the narrow-band FM (MSK) provided by the radio modules, the CDT-TX-02M-R and CDT-RX-03M include all the necessary components for processing switching signals, allowing them to be transmitted and received without the addition of external circuits. The modules provide six switching inputs/outputs and feature four selectable, preprogrammed RF channels.
SKU: n/a -
Electronic Components, Module, Power Supply
Power Supply Box PS6-100 – SUS Corporation
The cluttered power supply wiring is now clear!
A single power supply box can provide up to 6 circuits with a total current of 4A. Even when multiple motorized components are used simultaneously, neat power wiring can be achieved.
SKU: n/a -
Electronic Components, Module, Power Supply
Power Supply Unit 24PS-6050/24PS-6100/24PS-6150 – SUS Corporation
Electronic Components, Module, Power SupplyPower Supply Unit 24PS-6050/24PS-6100/24PS-6150 – SUS Corporation
DC power supply comes in a new, easy-to-use form!
This unit, equipped with six output ports, can be used for multiple devices. Moreover, the extended range of connection cables allows it to be used with stainless steel-made devices, from power units and other drive systems to LED lighting.
SKU: n/a -
Electronic Components, Module
WPM-1-11 Series – Watanabe Electric Industry Co. Ltd.
This digital panel meter is equipped with extremely bright and colorful LEDs (high-brightness LEDs) and a large-capacity sensor power supply.
The lineup includes single display type with large LED and multi display type with sub-monitor.
Equipped with convenient functions such as auto-range, setup function, and linearize setting, these digital panel meters are unique to Watanabe Electric Industry.
SKU: n/a
Are you looking for a module product?
When selecting a module for your company’s needs, there are several important points to consider during the comparison and evaluation process.Common Comparison Points for Any Module
1. Functionality and Compatibility
Determine the specific functionality and compatibility requirements for your application. Identify the features and capabilities you need in a module and ensure compatibility with your existing systems or equipment.
2. Performance Specifications
Evaluate the performance specifications of the module. This includes parameters such as speed, accuracy, resolution, capacity, response time, and signal-to-noise ratio. Compare these specifications with your application requirements to ensure optimal performance.
3. Reliability and Quality
Consider the reliability and quality of the module. Look for modules from reputable manufacturers known for producing reliable and high-quality products. Check for certifications or standards compliance to ensure the module meets industry requirements.
4. Interface and Connectivity
Assess the interface and connectivity options of the module. Determine if it provides the necessary communication protocols, ports, and connectors to integrate with your existing systems or equipment. Consider compatibility with your data acquisition or control systems.
5. Power Requirements
Determine the power requirements of the module, including voltage levels and power consumption. Ensure that the module can be adequately powered and that it aligns with the available power sources in your facility.
6. Size and Form Factor
Evaluate the physical dimensions and form factor of the module. Consider the available space and mounting options in your system or equipment. Choose a module size and form factor that can be easily integrated.