DSSS Low Power Radio Transceiver STD-503 – Circuit Design Inc.
Compact 2.4 GHz transceiver for industrial applications
The STD-503 is a 2.4 GHz transceiver housed in a small, compact shield casing, designed for industrial applications.
Report Abuse
The STD-503 Transceiver
Modulation: The transceiver utilizes Direct Sequence Spread Spectrum (DSSS) modulation and a true diversity circuit, allowing for reliable communication even in the congested 2.4 GHz band.
Compliance: The STD-503 complies with the European EN 300 440, U.S FCC Part 15.247, Canadian ISED RSS-210, and Japanese ARIB STD-T66 standards, making it ready for the global market.
Performance: Low power consumption and battery operation give the STD-503 the performance required for applications where long range and reliability are essential.
Interface: The transceiver utilizes a transparent data interface to enable users to communicate using their own protocols. The module’s configuration can be easily set via the UART interface using dedicated commands.
Applicable standard | EN 300 440 / FCC part15.247 / ARIB STD-T66 / IC RSS-210 |
Communication method | Simplex |
Transmission method | Direct sequence spread spectrum |
Emission type | F1D (FSK) |
Frequency | 2402.5 to 2478.5 MHz |
Channel spacing | 1 MHz |
Data bit rate | 19.2 kbps |
Chip rate | 288 kcps |
RF connectors | MHF x 2 |
Spreading code | 15 Chips (M-sequence(111101010001100)) |
Operating temperature range | -20 to +65 degree C (No dew condensation) |
Supply voltage | 3.3 to 5.0 V DC (Absolute max. voltage 5.5 V) |
Supply current | 48 mA typ. (TX), 55mA typ. (RX) |
Dimension | 40 x 29 x 5.5 mm |
Weight | 10 g |
Communication range | 300m LOS |
Product Usage
Reliability and competitiveness
Circuit Design is a leading design and manufacturing company of low power radio products. Circuit Design designs and supplies low power narrow-band standard radio modules for short-range applications. Our RF modules are designed to serve customers in fields such as Telecommand and Telecontrol, Telemetry, and in the Alarm market where high reliability is required for industrial applications. Circuit Design’s quality system is certified by ISO9001. Circuit Design’s corporate objective is to enhance customer reliability and competitiveness in their radio link applications by providing the necessary narrow band products.
Address
7557-1, Hotaka, Azumino-city, Nagano, 399-8303, Japan
Need more info ?
Circuit Design English catalog
Circuit Design, Inc.
Supplier Information
- Store Name: Circuit Design, Inc.
- Vendor: Circuit Design, Inc.
- Address: 399-8303
Nagano Azumino 7557-1
Hotaka
- Electronic Components, Module
2-FSK or LoRa mode Low Power Long Range Radio Modem SLR-434M – Circuit Design Inc.
Electronic Components, Module2-FSK or LoRa mode Low Power Long Range Radio Modem SLR-434M – Circuit Design Inc.
434 MHz embedded radio modem for data transmission up to a few km or more
The SLR-434M smart modem is a compact and easy-to-use embedded radio modem operating in the 434 MHz ISM band. It allows for conventional FSK mode communication and also communication using LoRa® mode, providing long range at a lower bit rate.
With its high receiving sensitivity, it is possible to transmit up to a few kilometers or more with line of sight using low RF output power.
By connecting to an external CPU or PC with a UART interface, the user can send data or design simple control systems using Circuit Design’s dedicated command protocol for industrial applications. It is also possible to process up to eight switching signals.
Applications include data transmission, telemetry, and telecontrol.
* Under certain conditions, when LoRa modulation is used in conjunction with a low data rate, higher sensitivity is achieved and longer range becomes possible. When used in conventional FSK mode, up to 600 m (LOS) range should be expected.
The SLR-434M contains a Semtech’s LoRa® wireless RFIC.
The LoRa® Mark and LoRa Logo are trademarks of Semtech Corporation.SKU: n/a - Electronic Components, Module
Channel Programmable Transceiver STD-302Z – Circuit Design Inc.
419 / 429 / 434 / 447 / 458 / 869 MHz transceiver for industrial remote control of heavy machinery
The UHF FM narrowband semi-duplex radio module STD-302Z operating at 434 MHz is suitable for industrial remote control and telemetry applications in the 434 MHz ISM band.
SKU: n/a - Electronic Components, Module
8 on/off switching signals Telecommand module NK-2.4Y – Circuit Design Inc.
Electronic Components, Module8 on/off switching signals Telecommand module NK-2.4Y – Circuit Design Inc.
2.4 GHz FCC Part 15 certified embedded radio module for shutter open-close control switch
The NK-2.4Y is a 2.4 GHz embedded telecommand module that can transmit 8 on/off switching signals incorporating CRC-16 error detection for error-free communication. A Hamming distance of 6 helps to minimize any malfunctions.
By setting one module as input mode and another as output mode, it is possible to drive a maximum of eight outputs from eight inputs. For example, you can connect switches/buttons to the input module and control relays or motors at the output module.
The NK-2.4Y switches between transmit and receive rapidly, allowing two-way communication between input and output module to constantly monitor the communication link status. By displaying this link status as an output signal from the module, this will help the user stay within the signal coverage area. Frequency hopping minimizes interference from other nearby radio systems on the 2.4 GHz band. There is no need to manage any channels, and multiple system operation in the same area is possible.
Low voltage and current consumption allow the module to operate on 2 x 1.5 V or 1 x lithium coin battery.
Communication is 1:1 only ((1:N or N:1 not possible).
Note: The external antenna is not included with the NK-2.4Y. If required, please specify the antenna to be used. Refer to the antenna list here.
When the internal pattern antenna is used, please make sure to short the ANT select jumper on the board.
SKU: n/a - Electronic Components, Module
Analog Multi Channel Wireless Audio Transmitter and Receiver WA-TX/RX-03S – Circuit Design Inc.
Electronic Components, ModuleAnalog Multi Channel Wireless Audio Transmitter and Receiver WA-TX/RX-03S – Circuit Design Inc.
863 – 865 MHz multichannel (15 ch) audio modules for wireless microphone systems
The WA-TX-03S / WA-RX-03S are 15-channel multichannel audio modules that operate in the European harmonized 863 – 865 MHz band with RF power selection of 5 and 10 mW.
SKU: n/a - Electronic Components, Module
Miniature Narrow Band Radio Transceiver STD-601 – Circuit Design Inc.
429 / 434 / 447 / 458 MHz transceiver for industrial remote control and telemetry applications
The STD-601 is a miniature transceiver designed for industrial remote control applications, conforming to the EN 300 220 standard.
SKU: n/a