Water-cooled cooling plate DET-4120 / CHP-44LC – Sensor Controls Co.Ltd.
Low-cost heating and cooling plates provide a precise temperature characteristic test environment
A full-scale temperature characteristic test can be started immediately by simply combining it with a temperature controller.
Report Abuse
Features
Water-cooled heating plates have a temperature range of -40°C to 120°C
The air-cooled plate has a maximum temperature difference of -40°C from room temperature.
Temperature rise from -40°C to 120°C in about 5 minutes (temperature drop from Rt to -40°C in 2 minutes)
The cooling/heating part uses a highly reliable Peltier element manufactured in-house to guarantee durability in repeated experiments.
We always put ourselves in the customer’s shoes and strive for 100% satisfaction after the purchase.
Sensor Controls Co., Ltd. is a supplier of Thermoelectric products which are produced with Peltier modules. We offer top reliability but low-cost TEC products from -40 to +120 degree C.
Supplier Information
- Store Name: Sensor Controls Co.,Ltd.
- Vendor: Sensor Controls Co.,Ltd.
- Address: 231-0005
Kanagawa Naka-ku Yokohama Honcho
- Electronic Components, Module
Peltier Module UT2020-AL / UT4040-AL / UT7070-AL – Sensor Controls Co.Ltd.
Electronic Components, ModulePeltier Module UT2020-AL / UT4040-AL / UT7070-AL – Sensor Controls Co.Ltd.
High reliability with more than 500,000 cold and heat cycles (10°C ⇆ 100°C)
The highest heat transfer rate is achieved by bonding the P/N type thermoelectric semiconductor directly to the surface aluminum plate without rigid body.
SKU: n/a - Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Air-cooled cooling plate CHP-772HS / 77HI / 44HS /55HS – Sensor Controls Co.Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentAir-cooled cooling plate CHP-772HS / 77HI / 44HS /55HS – Sensor Controls Co.Ltd.
Temperature range from a maximum of 120°C to a minimum of -20°CProvides an easy temperature environment with only a cold plate and temperature controller
This model can easily provide a temperature environment with only an air-cooled cold plate and a temperature controller.
SKU: n/a
Related products
- Industrial Machinery, Labeling Machine, Packaging Machines
Compact Shrink Labeler FG RAPID – Fujiyama Pack System Co.
Industrial Machinery, Labeling Machine, Packaging MachinesCompact Shrink Labeler FG RAPID – Fujiyama Pack System Co.
High performance and low cost! Shrink labeler for easy mold change and adjustment.Combined with PS CYCLONE, we offer a low-cost shrink labeler.
Our shrink labeler machines, which boast industry-leading performance, can be used for a variety of packaging applications, including food and pharmaceutical containers, which are indispensable for daily life, and cap seals, which are effective in preventing tampering. Our unique technology of directional control is also one of the best in the industry.
Capacity ~60 containers/minute *Depends on product specifications.
Applicable containers Round, square, and flat containers.SKU: n/a - Industrial Machinery, Packaging Machines
Accumulation for PTP Intermittent Horizontal Cartoner CTC-1000 – Nippon Automatic Fine Machinery Co. Ltd
Industrial Machinery, Packaging MachinesAccumulation for PTP Intermittent Horizontal Cartoner CTC-1000 – Nippon Automatic Fine Machinery Co. Ltd
Accumulation for PTP Intermittent horizontal cartoner
The purpose of this machine is to pack 100 to 1,000 PTP tablets in a single unit, and its structural design meets the basic requirements of GMP. In order to minimize human error, the female part of the mold changer is designed to be applied to the female side of the mold to ensure that it can be locked in the same place, and the position adjustment is numerically controlled by digital positioning. To ensure higher quality, a slide is provided at the bottom of the conveyor to ensure that products and attached documents fall to the operator’s side. SUS and aluminum are used as materials to improve quality.
SKU: n/a - Blowers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
VP1series The casing and rotor are water-cooled – Yotsuba Air Machine Manufacturing Co. Ltd
Blowers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentVP1series The casing and rotor are water-cooled – Yotsuba Air Machine Manufacturing Co. Ltd
It can be used for any application
his blower that goes beyond common sense.
Pumping, suction, boosting, vacuum, compression, anything
The gas contact parts：Can be manufactured with stainless steel, special materials, PFA lining, etc.SKU: n/a - Blowers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
FLB-NO.8 – BLOWER – Yotsuba Air Machine Manufacturing Co. Ltd
Blowers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentFLB-NO.8 – BLOWER – Yotsuba Air Machine Manufacturing Co. Ltd
Our FLB type rotary blower is an intermediate pressure & intermediate capacity pressure compressor for gas transfer. Now the machine is capable of transferring various kinds of gasses.
As a specialized company making rotary blowers, we use our cutting edge technology new design policy and make every effort to respond to your needs. We have numerous results delivering blowers made from special materials such as stainless steel and for special purposes such as circulating high-temperature/high-pressure gases. Please contact us with your needs.
SKU: n/a
