Heat Exchangers
Showing all 13 results
-
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Air-cooled cooling plate CHP-772HS / 77HI / 44HS /55HS – Sensor Controls Co.Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentAir-cooled cooling plate CHP-772HS / 77HI / 44HS /55HS – Sensor Controls Co.Ltd.
Temperature range from a maximum of 120°C to a minimum of -20°CProvides an easy temperature environment with only a cold plate and temperature controller
This model can easily provide a temperature environment with only an air-cooled cold plate and a temperature controller.
SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Aluminum Plate Type Stationary Sensible Heat Exchanger CROSSTERM® (CROSSTERM®) – Takasago Thermal Engineering Co. Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentAluminum Plate Type Stationary Sensible Heat Exchanger CROSSTERM® (CROSSTERM®) – Takasago Thermal Engineering Co. Ltd.
Aluminum plate type direct alternating current stationary sensible heat exchanger with extremely low leakage
CROSSTERM® is an aluminum plate static DC sensible heat exchanger that recovers sensible heat from exhaust air to supply air through two adjacent plates.
SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Automatic liquid temperature controllers – KAMUI CO.LTD.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentAutomatic liquid temperature controllers – KAMUI CO.LTD.
At Kamui, we provide a wide range of heat exchangers so that we can address all of our customers’ needs.
This is an oil cooler with built-in refrigeration that automatically controls the temperature of liquids such as lubricants, hydraulic oil, cutting oil, cutting fluid, etc.
SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Elofin heaters Heat exchangers for heating and drying equipment – Katsukawa Thermal Engineering Co. Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentElofin heaters Heat exchangers for heating and drying equipment – Katsukawa Thermal Engineering Co. Ltd.
Used as a heater to heat air with steam/hot water/heating medium oil
These heaters are mainly used for heating air (gas) and are incorporated in air conditioners, drying facilities, drying equipment, etc. The structure consists of multiple elophine tubes welded into a bundle (header) and housed in a steel plate duct-type casing.
The structure consists of multiple elophane tubes welded to a bundle of tubes (header) and enclosed in a steel plate duct-type casing.
SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Heater stand-alone – HeatTec Co. Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentHeater stand-alone – HeatTec Co. Ltd.
High-quality industrial heaters can be manufactured from a single unit.
We can design a heater capacity, material, operating temperature, shape, size, etc. to suit your purpose of use and usability.
Please consult us even if you do not have drawings or specifications.SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Hot air generator Cabinet heater – Katsukawa Thermal Engineering Co. Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentHot air generator Cabinet heater – Katsukawa Thermal Engineering Co. Ltd.
Environmentally friendly heating system with natural convection using steam
A hot air generator is a unit consisting of a heater and a fan.
The size of the heater and the type and selection of the fan are determined according to the amount of air flow, temperature conditions, required heat value, and intended use.While the heater for the production line is a part of the equipment, the hot air generator is a component of the drying equipment.
In drying equipment, the hot-air generator is installed on the top of the equipment or outside of the equipment, and is optimally shaped for various drying applications.SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
LS fin heater Plate fin – Katsukawa Thermal Engineering Co. Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentLS fin heater Plate fin – Katsukawa Thermal Engineering Co. Ltd.
Next Generation Fintubes
It can be called a new generation Elofin heater that solves the problem of heaters using aluminum Elofin tubes, which have durability problems. When employed in a circulating drying oven (dryer), the heat transfer area can be reduced to a maximum of about 1/2 that of an elo- fin type. In other words, if two Elofin heaters are required up to now, only one can satisfy the capacity!
SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Next generation global environmental specification [Plate & Shell heat exchanger – Kamata Industry Co.ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentNext generation global environmental specification [Plate & Shell heat exchanger – Kamata Industry Co.ltd.
The plate & shell heat exchanger is a highly efficient & compact next-generation heat exchanger that combines the robustness of the multi-tube type with the efficiency of the plate type.
The Bartels plate and shell heat exchanger from Finland is a revolutionary heat exchanger that is the culmination of unique Scandinavian wisdom and ideas.
As a high-performance and compact next-generation global environmental type heat exchanger, Bartels boasts a track record of more than 40,000 units in operation worldwide since its launch in 1990.
They are highly evaluated by a wide range of industries, including energy, chemical, food, and other plants, refrigeration facilities, offshore, and marine facilities.SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Plate Fin Coolers Heat Exchangers for Cooling and Dehumidification Equipment – Katsukawa Thermal Engineering Co. Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentPlate Fin Coolers Heat Exchangers for Cooling and Dehumidification Equipment – Katsukawa Thermal Engineering Co. Ltd.
Used to cool air and various gases by passing chilled water or refrigerant through the heat transfer tube.
Plate fin coolers are the same in construction as the fin coils found in residential air conditioners, and it is easier to understand if you think of them as being larger and geared toward heavy use.
Plate fin coolers are used as heat exchangers in various equipment and are also called chilled water coils, refrigerant coils, or direct expansion coils, depending on their purpose and use. In air conditioning terminology, the term coil refers to heat exchangers such as heaters and coolers.
SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Plate fin heaters Heat exchangers for heating and drying equipment – Katsukawa Thermal Engineering Co. Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentPlate fin heaters Heat exchangers for heating and drying equipment – Katsukawa Thermal Engineering Co. Ltd.
Ideal for process air conditioning.
Plate fin heaters have a larger fin area than elofin heaters, which results in fewer tubes, making them compact, lightweight, and inexpensive. Currently, they are in greater demand than elophine heaters. Plate fin heaters, like elophine heaters, are mainly used for heating air (gas) and are incorporated in air conditioners, drying facilities, and drying equipment. The structure consists of a tube (heat-transfer tube) with a coil element made by pressing (press-fitting) thin sheets of various metals into the tube, which is welded to a tube bundle (header) and installed in a steel plate duct-type casing.
SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Radiator type heat exchangers – KAMUI CO.LTD.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentRadiator type heat exchangers – KAMUI CO.LTD.
At Kamui, we provide a wide range of heat exchangers so that we can address all of our customers’ needs.
Radiator type heat exchangers (plate and fin type) use fans to circulate air and cool the fluid inside the tubes of the exchanger.
SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Shell and tube type heat exchangers – KAMUI CO.LTD.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentShell and tube type heat exchangers – KAMUI CO.LTD.
Fluid is passed through the shell (cylinder) and various tubes (heat transmission tubes), and heat exchanged between them.
Shell and tube type heat exchangers (multi-tubular heat exchangers) feature a shell (body) and multiple tubes (heat transfer tubes).
They are designed so as to achieve a large transfer surface area within a small space, with minimal loss of fluid pressure. They can be applied to all purposes, from low temperature to high temperature, from low pressure to high pressure, and for heating, cooling, evaporation and condensation.
They are highly reliable in comparison with other types of heat exchanger, and are the most widely used in the hydraulic and chemical related industries.
Their basic structure is simple, so maintenance is very easy.SKU: n/a -
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
Water-cooled cooling plate DET-4120 / CHP-44LC – Sensor Controls Co.Ltd.
Heat Exchangers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentWater-cooled cooling plate DET-4120 / CHP-44LC – Sensor Controls Co.Ltd.
Low-cost heating and cooling plates provide a precise temperature characteristic test environment
A full-scale temperature characteristic test can be started immediately by simply combining it with a temperature controller.
SKU: n/a
Are you looking for a heat exchanger product?
When selecting a heat exchanger for your company’s needs, there are several important points to consider during the comparison and evaluation process.Common Comparison Points for Any Product
1. Heat Transfer Efficiency
Evaluate the heat transfer efficiency of the heat exchangers. Look for equipment that offers high thermal conductivity and effective heat exchange capabilities. Consider factors such as the heat transfer coefficient, surface area, flow path design, and overall design efficiency of the heat exchanger.
2. Application Requirements
Determine the specific requirements of your application. Identify the heat load, temperature range, pressure range, and fluid compatibility requirements. Ensure that the selected heat exchanger can handle the thermal conditions and fluid properties of your application effectively.
3. Size and Space Constraints
Consider the physical size and space constraints of the heat exchanger. Evaluate the available space in your facility or equipment and choose a heat exchanger that fits within those dimensions. Also, consider the heat exchanger’s weight, orientation, and any installation or maintenance clearance requirements.
4. Flow Rate and Pressure Drop
Assess the flow rate and pressure drop characteristics of the heat exchanger. Evaluate the heat exchanger’s ability to handle the required fluid flow rates while maintaining an acceptable pressure drop. High flow rates and excessive pressure drops can impact system performance and efficiency.
5. Material Selection
Consider the materials used in the construction of the heat exchanger. Look for materials that are suitable for your application, considering factors such as corrosion resistance, temperature resistance, and compatibility with the fluids being processed.