Vegetable Slicer – KSC-155 KINPIRA – Happy Japan Co.
Vegetable slicer.
This signficant cutter, the only one available on the market, is a combination of the cutter and regulating plate.
Will cut 3kgs per minute.
Watch Video : https://youtu.be/0JriLZ1yDM0
Report Abuse
Specification
Mechanical dimensions : W405mm x L241mm x H438mm
Machine weight : 9.8kg
Packing size : W440mm x L270mm x H490mm
Packing weight : 12kg
Motor : Single-phase 100V
Thickness adjustment : none
Body price (excluding tax) : ¥148,000
Frequently Asked Questions
Q. How do I use it?
A. Cut vegetables into 7 to 8 cm pieces and place them in the slot. Then, turn the switch to “ON” while lightly pressing the vegetable with the attached push stick.
Q. What is the rated usage time?
A. About 30 minutes. If the machine is used for a long time, the motor temperature will rise and the machine will automatically stop. (Thermal protector function).
Please wait 30 minutes for the motor temperature to cool down.
It is better to turn off the machine before the motor stops automatically to avoid stressing the motor.
Q. What is the processing capacity?
A. The machine can process about 10 kg in 10 minutes, and can run continuously for 30 minutes, so it can process 30 kg at a time.
Q. How do I wash it?
A. The inlet, front cover, and slide can be removed and washed in cold water. Wipe the main body with a cloth wrung out tightly.
*Water splashed on the switch and motor may cause malfunction. Never pour water on them.
The blade on the slide part is dangerous, so please wash it with the attached brush.
Use a neutral detergent. Do not use a dryer or boiling water.
Q. How big is the entrance?
A. It is 8 cm long, 7.6 cm wide, and 9 cm deep.
Q. What can be cut?
A. You can cut burdocks, radishes, carrots, Kanto leeks (for leek ramen), cucumbers, sweet potatoes, ham, ginger, turmeric, etc.
Q. What is the size of the cuttings?
A. The standard size is 3 mm thick and 3 mm wide (3 x 3). By removing the comb blade, it can be sliced flat.
*When changing the width, replace the comb blade and the large urethane rubber blade as a set.
Q. Can it slice white onions?
A. No, it can not slice shiraganegi, but it can slice Kanto leeks (long green onions) into thin strips. (Shiraganegi (white onion) julienne that also uses the core in leek ramen).
However, the width should be at least 3mm. 2mm width will cut well when the blade and green onion are new, but it tends to get stuck easily.
Q. Why can’t I cut vegetables well?
A. The blade is no longer cutting or the urethane rubber is worn out. The blade is a consumable item and should be replaced with a new one. The urethane rubber acts like a cutting board and should be replaced if it is worn out.
Q. Can the blade be ground?
A. Some people grind flat blades, but comb blades cannot be ground.
Happy Japan Co. manufactures and sells “SINGER” household sewing machines, and related equipment.
Happy Japan Co. is engaged in the production and distribution of various machinery. It offers household sewing machines and industrial embroidery machines under the brand name “SINGER”. The company also provides food equipment, including “Autonegy” and “Cavetu”, as well as IC handlers, such as “Rt-518mH16”. Furthermore, Happy Japan Co. is involved in the development, design, manufacturing, installation, and maintenance of other FA equipment.
Globally redefining “happy” by using our monozukuri technology to realize the good life for all.
Amid the recent wave of globalization, HappyJapan Inc. was launched in October 2014 by merging three core companies of the Happy Group. As for our company name, “Happy” follows the founding spirit of making people happy; “Japan” signifies our spirit to create reasonably priced products of high quality through Japan’s meticulous monozukuri.
Now, after more than half a century of delivering products that enrich people’s lives, we wish to create unprecedented products and ideas as well as generating impressions and joy that exceed customer expectation.
In line with this vision, we united as HappyJapan and, with our global partners, take up a new and exciting challenge. With our founder’s original inspiration in mind, we shall raise the bar on our superior monozukuri beyond the bounds of country and technology to realize everyone’s idea of happiness.
Philosophy
Inspire customers with our monozukuri* and
be a company that generations come to rely on.
Need more info ?
MIJIN / TSUMA ・ KATSURA / KINPIRA
Happy Japan Co.
Supplier Information
- Store Name: Happy Japan Co.
- Vendor: Happy Japan Co.
- Address: 990-0845
Yamagata Yamagata 3-3515, Tachiyagawa
- Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Vegetable Slicer – MSC-200 MULTI – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterVegetable Slicer – MSC-200 MULTI – Happy Japan Co.
Optional blades available for slicing, dice cutting, thread cutting. An all-round cutter for restaurant.
The dice cut function responds to the customer’s request.
Optional blades available for slicing, dice cutting, thread cutting. An all-round cutter for restaurant. Wide slit and blade disk of high-speed rotation acheive the processing power of the small slicer maximum level.Watch Video : https://youtu.be/_vO0Cpulx0o
SKU: n/a - Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Vegetable Grinder – RHG-16H OROSEE D.X – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterVegetable Grinder – RHG-16H OROSEE D.X – Happy Japan Co.
For grating radish, yam, carrot, ginger, onion, etc.
For grating radish, yam, carrot, ginger, onion, etc.
This is a grade-up model of the RHG-15G.
Has improved the overall quality substantially.“Example of use”
Grated daikon (Japanese white radish)
Introduction video : https://youtu.be/sb9GzrWo8kY
1. Peel the ingredients.
2. This machine has a feed port of 90mm dia.
This machine has a feed port of 90 mm dia. If the daikon is too large to fit in the slot, split it lengthwise.
3.When the machine is turned on, the grater rotates, and the ingredients are pressed against it.
When the food is too short, be sure to use the push stick for safety.
4. The grated ingredients will come out from the discharge port.SKU: n/a - Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Slant Cutting Machine – OBS-01 SHALICER – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterSlant Cutting Machine – OBS-01 SHALICER – Happy Japan Co.
Slant cutting machine. Only put foods to throat.
Appearance of long-expected angle-slice machine. Also cop well for food stuffs.(example:welsh onion, cucumber, burdock, etc)
Only put food stuffs to throat. Slant cutting welsh onion available for PAN GRILLING NOODLE. You can increase cutting size up to 190mm when you order optional another angle throat.By simply replacing the feed port (sold separately), the length of the cut can be up to 190 mm. Thin, long diagonal slices of green onion are ideal for “green onion ramen. Long diagonal slices of cucumber are ideal for sandwiches and other cooked breads.
“Example of use”
Watch Video : https://youtu.be/puzQOy-gaXs
1. Cut the root of leeks.
2. Set the ingredients and turn on the machine, and the feed port will move back and forth to cut the ingredients.There is a thickness adjustment knob at the back of the machine, so you can set the maximum thickness up to 15 mm.
SKU: n/a - Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Green Onion Cutting Machine – OHC-13G NEGEE – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterGreen Onion Cutting Machine – OHC-13G NEGEE – Happy Japan Co.
“NEGEE” is a special machine for cutting long onions for condiments.
Introducing with a safety device.
“NEGEE” is a special machine for cutting long onions for condiments.
Ideal for soba, udon, and ramen shops.Watch Video:https://youtu.be/1npXye8yB4A
SKU: n/a - Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Vegetable Slicer – MSC-90 SLICE BOY – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterVegetable Slicer – MSC-90 SLICE BOY – Happy Japan Co.
Optional blade is available for thin and thick slicing, thread cutting, grating.
Optional blade is available for thin and thick slicing, thread cutting, grating. An all-round cutter fot the smaller food shops.
Watch Video : https://youtu.be/hjboRFnw_z4
“2.0mm cut (sliced disk)”
1. Peel the ingredients.
2. Set the food into the slot of the machine and turn on the switch.
3. Cut the food using the attached push stick.
For safety reasons, be sure to use the push stick when the food is short.
4. The cut ingredients will come out from the machine’s discharge port.
The machine rotates at 140 rpm. The machine has two disks with blades, so it cuts 280 times per minute.“Julienne (julienne cutting disk)”
1. Peel the ingredients.
2. Set the food into the feed slot of the machine and turn on the switch.
3. Use the attached push stick to cut.
Be sure to use the push stick for safety.
4. The cut ingredients will come out from the discharge port of the machine.Due to the characteristics of the machine, the blade cuts in a circular motion. Therefore, please be aware that the finished product will be curved from the beginning.
“Example of other ingredients”
radish, carrot, potato, onion, sweet potato, pumpkin, gobo, bitter gourd, cucumber, bamboo shoot, shiitake mushroom, apple, kiwi, ginger, ginger oroshiSKU: n/a