Vegetable Slicer – HMC-65 MIJIN – Happy Japan Co.
Vegetable slicer.
This signficant cutter, the only one available on the market, is a combination of the cutter and regulating plate.
Will cut 3kgs per minute.
Watch Video : https://youtu.be/2Gt8YY49lOo
Report Abuse
Specification
Mechanical dimensions : W188mm x L284mm x H422mm
Machine weight : 5.1kg
Packing size : W300mm x L220mm x H470mm
Packing weight : 7kg
Motor : Single-phase 100V
Thickness adjustment : none
Body price (excluding tax) : ¥73,000
Frequently Asked Questions
Q. How do I use it?
A. Turn the switch to “ON” (the blade rotates) and put in vegetables cut into 4 cm cubes. Do not put in a large amount at a time. It is more efficient to put in a little at a time.
The coarseness can be adjusted by changing the coarseness adjustment plate under the blade. If you want to make the vegetables even finer, feed them in again. (Twice through).
*Do not put your hands or fingers in the feed port, as it is dangerous.
Q. What is the rated usage time?
A. About 30 minutes. If the machine is used for a long time, the motor temperature will rise and the machine will automatically stop (thermal protector). Please wait for about 30 minutes for the motor temperature to cool down.
It is better to turn off the switch before the motor stops automatically to avoid stressing the motor.
Q. What is the throughput?
A. The machine can process about 3 kg per minute, and since it can be used continuously for 30 minutes, it can process about 90 kg. (Theoretical value)
Q. How is it washed?
A. Remove the feeder lid, feeder opening, blade assembly, adjustment plate, top cover, and scrubbing board, and wash them with water. (Turn the feed port in the direction of “Loosen” to unlock it, and loosen the wing bolt to remove the blade.)
(Turn the feed inlet toward “Loosen” to release the lock, and loosen the wing bolt to remove it.) Sprinkle a small amount of water on the main body just enough to wash off the shavings to prevent water from getting on the switch.
*If water gets into the motor or switch, it may cause a malfunction.
Q. What is the size of the slot?
A. The diameter is 10 cm.
Q. Can the machine perform dice cutting? (Can it do dice cutting?) A. No.
A. No, it cannot. Only chopping.
Q. Can the coarseness be adjusted?
A. Yes, it can be adjusted by replacing the coarseness adjustment plate (coarse) and the fine adjustment plate (fine). If you want to make it even finer, feed it in again.
Q. What can be cut?
A. What can be cut: Cabbage, burdock, onion, etc.
Cabbage, burdock root, onion (*1), carrot, Chinese cabbage, potato, garlic, ginger, green bell pepper (*2), fresh hot pepper (*3)
Uncut:.
Seaweed (fresh), seaweed (dried), chives, seafood (fresh), green onion, seafood (dried)
1 Onions can be cut cleanly if you cut them into 1/3 or 1/4 round slices before putting them in.
2 The size of the grains will be uneven when coarsely chopped. The size of the grains will be uniform if you use a fine grit and feed it through twice.
3 Dried ones will not be cut cleanly because the blade will bounce off.
Happy Japan Co. manufactures and sells “SINGER” household sewing machines, and related equipment.
Happy Japan Co. is engaged in the production and distribution of various machinery. It offers household sewing machines and industrial embroidery machines under the brand name “SINGER”. The company also provides food equipment, including “Autonegy” and “Cavetu”, as well as IC handlers, such as “Rt-518mH16”. Furthermore, Happy Japan Co. is involved in the development, design, manufacturing, installation, and maintenance of other FA equipment.
Globally redefining “happy” by using our monozukuri technology to realize the good life for all.
Amid the recent wave of globalization, HappyJapan Inc. was launched in October 2014 by merging three core companies of the Happy Group. As for our company name, “Happy” follows the founding spirit of making people happy; “Japan” signifies our spirit to create reasonably priced products of high quality through Japan’s meticulous monozukuri.
Now, after more than half a century of delivering products that enrich people’s lives, we wish to create unprecedented products and ideas as well as generating impressions and joy that exceed customer expectation.
In line with this vision, we united as HappyJapan and, with our global partners, take up a new and exciting challenge. With our founder’s original inspiration in mind, we shall raise the bar on our superior monozukuri beyond the bounds of country and technology to realize everyone’s idea of happiness.
Philosophy
Inspire customers with our monozukuri* and
be a company that generations come to rely on.
Need more info ?
MIJIN / TSUMA ・ KATSURA / KINPIRA
Happy Japan Co.
Supplier Information
- Store Name: Happy Japan Co.
- Vendor: Happy Japan Co.
- Address: 990-0845
Yamagata Yamagata 3-3515, Tachiyagawa
- Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Vegetable Slicer – MSC-90 SLICE BOY – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterVegetable Slicer – MSC-90 SLICE BOY – Happy Japan Co.
Optional blade is available for thin and thick slicing, thread cutting, grating.
Optional blade is available for thin and thick slicing, thread cutting, grating. An all-round cutter fot the smaller food shops.
Watch Video : https://youtu.be/hjboRFnw_z4
“2.0mm cut (sliced disk)”
1. Peel the ingredients.
2. Set the food into the slot of the machine and turn on the switch.
3. Cut the food using the attached push stick.
For safety reasons, be sure to use the push stick when the food is short.
4. The cut ingredients will come out from the machine’s discharge port.
The machine rotates at 140 rpm. The machine has two disks with blades, so it cuts 280 times per minute.“Julienne (julienne cutting disk)”
1. Peel the ingredients.
2. Set the food into the feed slot of the machine and turn on the switch.
3. Use the attached push stick to cut.
Be sure to use the push stick for safety.
4. The cut ingredients will come out from the discharge port of the machine.Due to the characteristics of the machine, the blade cuts in a circular motion. Therefore, please be aware that the finished product will be curved from the beginning.
“Example of other ingredients”
radish, carrot, potato, onion, sweet potato, pumpkin, gobo, bitter gourd, cucumber, bamboo shoot, shiitake mushroom, apple, kiwi, ginger, ginger oroshiSKU: n/a - Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Green Onion Cutting Machine – OHC-50 MIDDLE NEGEE – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterGreen Onion Cutting Machine – OHC-50 MIDDLE NEGEE – Happy Japan Co.
Automatic green onion cutting machine
Happy Japan has a 30-year career in manufacturing green onion cutting machines.
It is the automatic green onion cutting machine provided by Happy.Watch Video : https://youtu.be/dD5Pn9dlhFM
SKU: n/a - Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Cabbage Cutting Machine – DRC-80 JUMBO CABBETSU – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterCabbage Cutting Machine – DRC-80 JUMBO CABBETSU – Happy Japan Co.
High speed cabbage slicer
There is high speed grade-up cabbage slicer of model RCS-71. Which is equipped with a drum that can slice 4~5 heads of cabbages per each time. The cutting blade is 170mmФ and durable for long hour use.
Watch Video : https://youtu.be/j6xQcyi2pBM
SKU: n/a - Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Cabbage Cutting Machine – RCS-71 CABBETSU – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterCabbage Cutting Machine – RCS-71 CABBETSU – Happy Japan Co.
Slices cleanly under the own weight of the cabbage
There is no need to press on the cabbage while slicing.
The turning drum and round blade is designed so that the cabbage is self-feeding and slices freely.
Cutting time for 13 to 15 head cabbage is 30 minute.
Cut cabbage in half and remove the core and feed into drum.
Cleaning is simple and easy.Watch Video : https://youtu.be/ULJmubf3cg0
“Example of use”
1. cabbage slices
Cut cabbage in half.
Remove the cabbage core in advance.
Turn on the machine with the cross section face down, and the machine will do the rest.
The thickness can be adjusted steplessly. (0.3 to 5.0 mm) 2.Cutting tomatoes
Tomatoes can also be cut using the optional onion attachment.*When using thin slices, the seeds will come off the pulp, so please use thick slices.
SKU: n/a - Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Vegetable Slicer – HNK-25 TSUMA KATSURA – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterVegetable Slicer – HNK-25 TSUMA KATSURA – Happy Japan Co.
Will cut tsuma to serve 100 person in a matter of 5minutes.
Will cut tsuma to serve 100 person in a matter of 5minutes.
Katsura cutting by hand requires years of training but this machine will do the job instantlly. Very popular for use in high class restaurant, tourist inn, wedding halls, hotels, sushi bars, caterer’s shops, etc.Watch Video: https://youtu.be/J_dsfabSJos
SKU: n/a - Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable Cutter
Green Onion Cutting Machine – OHC-220 AUTO NEGEE – Happy Japan Co.
Food & Beverage Machinery, Fruit & Vegetable Processing Machines, Vegetable CutterGreen Onion Cutting Machine – OHC-220 AUTO NEGEE – Happy Japan Co.
AUTO NEGEE is sliced with two planetary rotating round blades, so it cuts cleanly.
AUTO NEGEE is sliced with two planetary rotating round blades, so it cuts cleanly.
Can also be used for slicing various vegetable&fruits.“Example of use”
Sliced green onionWatch Video : https://youtu.be/H4H_Pxy0Ias
Turn on the power switch of the machine, and the blade and feed conveyor start moving.
Insert food material from the back of the machine.
The cutting thickness can be adjusted by adjusting the feed speed with the control knob. (Stepless adjustment from 0.3 to 10 mm)SKU: n/a