Which are you looking for?
, ,

Cabbage Cutting Machine – RCS-71 CABBETSU – Happy Japan Co.

Compare

Slices cleanly under the own weight of the cabbage

There is no need to press on the cabbage while slicing.
The turning drum and round blade is designed so that the cabbage is self-feeding and slices freely.
Cutting time for 13 to 15 head cabbage is 30 minute.
Cut cabbage in half and remove the core and feed into drum.
Cleaning is simple and easy.

Watch Video : https://youtu.be/ULJmubf3cg0

“Example of use”
1. cabbage slices
Cut cabbage in half.
Remove the cabbage core in advance.
Turn on the machine with the cross section face down, and the machine will do the rest.
The thickness can be adjusted steplessly. (0.3 to 5.0 mm) 2.

Cutting tomatoes
Tomatoes can also be cut using the optional onion attachment.

*When using thin slices, the seeds will come off the pulp, so please use thick slices.

Specification

Mechanical dimensions : W363mm x L364mm x H439mm
Machine weight : 13kg
Packing size : W410mm x L420mm x H535mm
Packing weight : 15.5kg
Motor : Single-phase 100V
Thickness adjustment : Thickness adjustment
Efficiency : 13～15head cabbages/30min
Body price (excluding tax) : ¥173,000

How to grind

1. Remove the drum and grinding wheel cover.

2. Set the supplied grinder into the machine (the blade is set between the two grinding wheels).

If cabbage chips or other debris are stuck in the mounting holes of the main unit, the grinding wheel will not be set in the correct position. Please make sure that there are no cabbage shavings in advance.

3.Turn on the machine, and the round blade will rotate.

4.Operate the lever of the grinder to apply the grinding wheel to the round blade.

Grind mainly the lower side of the blade. A few seconds of contact with the grinding stone is sufficient.
The upper side of the blade should be ground for about 1 second to remove “burrs”.

If you grind the upper side too much, you will end up with a double-edged edge, and the knife will not be able to cut.
After grinding is finished, be sure to clean the machine before use. (Iron powder is produced).

Frequently Asked Questions

Q. How is it used?

A.
1. cut the cabbage in half or 1/4 slice and remove the core.
2. put the cabbage cut side down in the drum.
3. simply turn on the machine and it will slice.
*To adjust cabbage thickness, use the adjustment knob. (Stepless adjustment from 0.3 to 5.0 mm)

Q. What is the rated usage time?

A. About 30 minutes. If used for a long time, the motor temperature will rise and the machine will automatically stop. (Thermal protector is effective.) *It takes up to 30 minutes for the motor temperature to cool down.
*Please wait for about 30 minutes for the motor temperature to cool down.
*Please wait for about 30 minutes until the temperature of the motor cools down.

Q. What is the processing capacity?

A. It takes 2 to 3 minutes to process one cabbage. 30 minutes of continuous use is possible, so it can process about 13 to 15 cabbages.

Q. What can be cut other than cabbage?

A. Spring cabbage and lettuce can be cut. Onions will roll around in the drum if the machine is used as it is, so please use the special attachment. (Option: ¥20,000-)

Q. When is the weight used?

A. Cabbage is cut by its own weight, so please use it when cabbage is running low.

*The weight contains gypsum and is set at 800g. Please do not add water, etc. and use as is. Doing so may cause a malfunction.

Q. Can the drum be used upside down?

A. No, it cannot. If the drum is worn or damaged, replace it with a new one.

Q. How do I wash it?

A. Remove the drum and round blade. The plate around the blade can also be removed. The removed parts can be washed with water. Wipe off the main body with a tightly wrung towel.

* Do not wash in hot water over 60 degrees Celsius. (Dishwasher is not acceptable.) * Use a mild detergent.
Use a neutral detergent. Spraying water on the main unit may cause the motor to malfunction.

Q. How do I remove the blade?

A.
Remove the drum. 2.
Insert the supplied stopper pin into the pin hole of the round blade and secure the round blade so that it will not move. 3.
Loosen the “blade attachment bolt” under the round blade and remove it. 4.
Tighten the removed “blade attachment bolt” from the top of the round blade, and lift up the blade to remove it.

Q. How do I remove the drum?

A.
RCS-70/60
Lift the drum straight up so that it does not hit the round blade.

RCS-40
Loosen the thumbscrew (drum shaft tightening screw) on the stand on which the drum is mounted, and lift the drum straight up so that it does not hit the round blade.

Q. How do I use the blade sharpener?

A.
1. remove the drum and grinding wheel cover. 2.
2. set the supplied sharpener on the machine (the blade is set between the two grinding wheels).
If cabbage chips or other debris are stuck in the mounting holes of the main unit, the grinding wheel will not be set in the correct position. Please make sure that there are no cabbage shavings in advance. 3.
Turn on the machine and the round blade will rotate. 4.
Operate the lever of the grinder to apply the grinding wheel to the round blade. Grind mainly the lower side of the blade. It can be sharpened by applying the whetstone for 2 to 3 seconds. The upper side of the blade can be sharpened by applying the whetstone for about 1 second to remove “burrs”.
If the upper side is sharpened too much, it will become “double-edged” and will not be able to cut.
After grinding, be sure to clean the machine before use. (There is iron powder on the surface of the machine.)

Old model 《RCS-60》 1.
Remove the round blade, turn the blade over, and set it in the machine. 2.
Insert the supplied grinder into the grinder mounting hole and turn on the switch. 3.
Press the knob (black) of the grinder lightly and apply the grinding wheel to the round blade.

Old model《RCS-40》)
Insert the drum into the drum mounting hole and tighten with the drum shaft tightening screw. 2.
2. lightly press the knob (black) of the grinder and apply the grinding wheel to the round blade to grind.

Q. How long should I apply the whetstone?

A. You only need to apply the whetstone to the blade for 2 to 3 seconds.
Please be careful not to apply the wheel too strongly or for too long, as it may break.

Q. What is the standard time for polishing?

A. It depends on your care and cutting discretion. (As a general guideline, please polish the blade once after cutting 50 cabbages.)

Q. Do you offer blade polishing?

A. Yes, we do.

Q. The cabbage is not cut well…?

A. Please grind the blade. (The same applies if it cuts thin or thick even if the thickness is adjusted or if only one side of the drum is cut)

Q. Neither the blade nor the drum moves at all…?

A. It is possible that the safety device has been activated and has stopped working.

Q. The drum is spinning…?

A.
– In the case of RCS-70
Is the weight filled with water?
The drum may have been overloaded and the center of the drum may be damaged. Replace the drum with a new one.
*The weight contains 800 g of plaster, so please use it as it is.

– In the case of RCS-40
The drive gear (white plastic gear) next to the drum may be worn out. Replace it with a new one.
It can be easily removed by inserting a flat-blade screwdriver or the like under the gear and pulling it up.

Q. Why do you take the core out first when putting in cabbage?

A. If you cut without removing the core, the cabbage will be shredded with the core still attached, and you will have to remove it later. It is more efficient to remove the core first.

Q. I want to replace the shatterproof cover…? (RCS-70)

A. We have a part called “upper case assembly.

Categories: , ,
Happy Japan Co.
Happy Japan Co.

Happy Japan Co. manufactures and sells “SINGER” household sewing machines, and related equipment.

Happy Japan Co. is engaged in the production and distribution of various machinery. It offers household sewing machines and industrial embroidery machines under the brand name “SINGER”. The company also provides food equipment, including “Autonegy” and “Cavetu”, as well as IC handlers, such as “Rt-518mH16”. Furthermore, Happy Japan Co. is involved in the development, design, manufacturing, installation, and maintenance of other FA equipment.

Globally redefining “happy” by using our monozukuri technology to realize the good life for all.
Amid the recent wave of globalization, HappyJapan Inc. was launched in October 2014 by merging three core companies of the Happy Group. As for our company name, “Happy” follows the founding spirit of making people happy; “Japan” signifies our spirit to create reasonably priced products of high quality through Japan’s meticulous monozukuri.

Now, after more than half a century of delivering products that enrich people’s lives, we wish to create unprecedented products and ideas as well as generating impressions and joy that exceed customer expectation.

In line with this vision, we united as HappyJapan and, with our global partners, take up a new and exciting challenge. With our founder’s original inspiration in mind, we shall raise the bar on our superior monozukuri beyond the bounds of country and technology to realize everyone’s idea of happiness.

Philosophy
Inspire customers with our monozukuri* and
be a company that generations come to rely on.

Need more info ?

Cabbage Cutting Machine RCS-71 / DRC-80

Happy Japan Co.

View Catalog

Vendor Information

  • Store Name: Happy Japan Co.
  • Vendor: Happy Japan Co.
  • Address: 990-0845
    Yamagata Yamagata 3-3515, Tachiyagawa

Related products