Products
- Conveyor, Industrial Machinery, Vibrating Conveyor
Balanced conveyor MVCB – SINFONIA TECHNOLOGY CO. LTD.
Conveyor, Industrial Machinery, Vibrating ConveyorBalanced conveyor MVCB – SINFONIA TECHNOLOGY CO. LTD.
0 out of 5(0)Simple vibration pollution prevention type.
The balanced conveyor is a vibration-prevention type that utilizes an exceedingly simple mechanism to prevent vibration from being transmitted to the mounting foundation. Vibration reaction forces are reduced by effectively balancing the trough and counterweight, and the entire unit is supported by anti-vibration springs, significantly reducing vibration transmitted to the foundation.
SKU: n/a - Conveyor, Industrial Machinery, Vibrating Conveyor
BM conveyor – SINFONIA TECHNOLOGY CO. LTD.
0 out of 5(0)Fully balanced type with high efficiency.
The BM conveyor is a conveyor that utilizes a completely balanced binder system.
The center points of the two upper and lower troughs, connected by springs, are supported on a fixed frame, and the upper and lower troughs are vibrated by the rotary motion of the motor and the resonant motion of the springs.SKU: n/a - Conveyor, Industrial Machinery, Vibrating Conveyor
MV conveyors MVC – SINFONIA TECHNOLOGY CO. LTD.
0 out of 5(0)Low-cost type with simple and robust construction.
The MV conveyor is a straightforward conveyor in which a trough supported by springs is vibrated by the rotary motion of an electric motor. Due to its uncomplicated and sturdy structure, it is especially suitable for special applications such as drying and cooling during transportation.
SKU: n/a - Conveyor, Industrial Machinery, Vibrating Conveyor
Rubber-spring conveyor HRC – SINFONIA TECHNOLOGY CO. LTD.
Conveyor, Industrial Machinery, Vibrating ConveyorRubber-spring conveyor HRC – SINFONIA TECHNOLOGY CO. LTD.
0 out of 5(0)Variable vibration angle and low floor type.
The rubber spring conveyor is a low-floor type conveyor that enables the vibration angle of the trough, which was previously hard to adjust, to be adjusted freely according to the material to be transported and the purpose of transport. The source of vibration is a motor-driven circular vibration of an unbalanced weight, which is amplified through a resonating rubber spring with a variable vibration angle to vibrate the entire trough evenly and stably.
SKU: n/a - Conveyor, Industrial Machinery, Vibrating Conveyor
RV conveyors RVF – SINFONIA TECHNOLOGY CO. LTD.
0 out of 5(0)Forced vibration type suitable for adhesive materials.
RV conveyors are vibratory conveyors with a vibration motor (RV motor) affixed to the trough as the source of vibration. The vibration motor produces vibration through the rotational motion of unbalanced weights attached to the rotary shaft of the electric motor, which directly imparts vibration to the trough.
SKU: n/a - Conveyor, Industrial Machinery, Spiral Conveyor, Vibrating Conveyor
Spiral elevator RVES – SINFONIA TECHNOLOGY CO. LTD.
Conveyor, Industrial Machinery, Spiral Conveyor, Vibrating ConveyorSpiral elevator RVES – SINFONIA TECHNOLOGY CO. LTD.
0 out of 5(0)Vertical transport type with the smallest footprint.
The spiral elevator combines a drive unit with a vertical spiral trough and utilizes vibration to transport all kinds of powder and granular materials vertically, while simultaneously cooling and drying them. The same principle can also be applied to downward conveying.
SKU: n/a
Company Profile
“Products from a variety of businesses” support the future with a global view
Global Environment is now at a turning point.
The forefront of manufacturing requires not only contribution to the evolution of society and industries, but onto eco-friendly products and technologies.
SINFONIA TECHNOLOGY embraces “new value connections” for the future based on its unique motion and energy control technology.
Sinfonia was established in 1917, and with electromagnetic control technology as the core itself, provides various products from clean transport devices, electrical components for space rockets, testing systems, vibrating equipment, small motors, electromagnetic clutchs/brakes and to printer systems. They are based on the own technologies, such as motion control and energy control.
Today, Sinfonia applys the technologies cultivated in the various fields, keeps contributing for the further social progress to develop the products used from “Regenerative medicine”, “Logistics” and “Agriculture” sectors.
Address
105-8564
Shiba NBF Tower, 1-1-30 Shiba Daimon, Minato-ku, Tokyo”