Other Measuring Tools
Showing all 11 results
- Measuring Instruments, Other Measuring Tools, Testing Instrument & Equipment
High Frequency Viscoelasticity Measurement System HFR002 – HighFrequency ViscoElasticity Corporation
Measuring Instruments, Other Measuring Tools, Testing Instrument & EquipmentHigh Frequency Viscoelasticity Measurement System HFR002 – HighFrequency ViscoElasticity Corporation
HFR002 realizes unprecedented ultrasonic viscoelasticity measurement.
It can measure not only bulk viscoelasticity (BOT) but also surface viscoelasticity (SUF) in megahertz.
High-frequency viscoelastic properties, which are closely related to the friction of rubber such as tires, can be determined.
Megahertz viscoelasticity measurement is also available for materials whose properties change depending on electric field.SKU: n/a - Measuring Instruments, Other Measuring Tools, Testing Instrument & Equipment
High-frequency viscoelasticity measurement device for liquid measurement Liq-F – HighFrequency ViscoElasticity Corporation
Measuring Instruments, Other Measuring Tools, Testing Instrument & EquipmentHigh-frequency viscoelasticity measurement device for liquid measurement Liq-F – HighFrequency ViscoElasticity Corporation
Liq-F can measure high-frequency viscoelasticity of fluids using ultrasonic waves.
Since megahertz viscoelasticity can be measured at room temperature, which was not possible before, it is expected to be able to determine the high-frequency viscoelastic properties of high-performance fluids under operating conditions.
It can measure not only bulk properties but also surface megahertz viscoelasticity.SKU: n/a - Measuring Instruments, Other Measuring Tools, Testing Instrument & Equipment
High-frequency viscoelasticity measurement device for liquid measurement Liq-F-mini – HighFrequency ViscoElasticity Corporation
- Measuring Instruments, Other Measuring Tools, Testing Instrument & Equipment
Miter Rule 3D 45° 90° Two-by-Four Clear – Shinwa Rules Co. Ltd.
Measuring Instruments, Other Measuring Tools, Testing Instrument & EquipmentMiter Rule 3D 45° 90° Two-by-Four Clear – Shinwa Rules Co. Ltd.
Easily Mark 2×4 Lumber
Angle Tolerance: Less than 0.2 mm per 100 mm
Scale Tolerance: ±0.2 mm
Measuring Range: 1 – 150 mmDesigned for working with “2 x 4 lumber”, this miter ruler boasts a variety of functions to ease the workload. Pencil guide holes for dividing lumber into halves (lap joints), thirds (Mortise and Tenon (M&T), bridle joint, etc.) and quarters (finger joints).
It is able to simultaneously confirm and scribe 90° and 45° angles. Made from clear polycarbonate, you can see your marks through the square and prevents scratching the surface.
SKU: n/a - Measuring Instruments, Other Measuring Tools, Testing Instrument & Equipment
Rheometer composite unit HFRU – HighFrequency ViscoElasticity Corporation
Measuring Instruments, Other Measuring Tools, Testing Instrument & EquipmentRheometer composite unit HFRU – HighFrequency ViscoElasticity Corporation
The HFRU can measure viscoelasticity using ultrasonic waves while applying low-frequency vibration and rotation.
It can measure megahertz viscoelasticity under large strain, which has not been possible until now, and is expected to enable the understanding of nonlinear viscoelastic properties of high-functioning fluids under shear. Simultaneous measurement with rheometer function is possible.
Not only bulk properties, but also surface megahertz viscoelasticity can be measured if the loss is large.SKU: n/a - Lab Supplies, Measuring Instruments, Other Measuring Tools, Testing Instrument & Equipment
Dry Keeper Auto Cｰ3 type – SANPLATEC CORP.
Lab Supplies, Measuring Instruments, Other Measuring Tools, Testing Instrument & EquipmentDry Keeper Auto Cｰ3 type – SANPLATEC CORP.
The electronic dehumidification system maintains relative humidity levels at 30% to 40%, keeping dry air circulating throughout the cabinet. The RH level varies depending on the usage condition.
SKU: n/a
Are you looking for a Other Measuring Tools product?
When selecting Other Measuring Tools for your company’s needs, there are several important points to consider during the comparison and evaluation process.
1. Accuracy
Ensure that the measuring tools provide accurate and precise measurements to meet your quality control and inspection requirements.
2. Durability
Evaluate the durability and robustness of the measuring tools to withstand frequent use in industrial environments without compromising performance.
3. Functionality
Consider the range of functions and features offered by the measuring tools, such as measurement types, units, and modes, to meet your specific measurement needs.
4. Cost-effectiveness
Compare the cost of the measuring tools with their accuracy, durability, and functionality to determine their overall value and cost-effectiveness.
5. Supplier Reputation
Research the reputation, reliability, and customer feedback of the supplier to ensure quality products and satisfactory customer service.