Collective generator controller AGC series – Daiichi Electronics Co. Ltd.
This product can be used for wide range of purposes such as habitual/emergency power generation, cogeneration, etc.
This product is multi-functioned generator controller to control synchronizing/load distribution/constant power factor/constant voltage/constant frequency/operation unit no. in parallel operation between commercial and generator/between generator and generator.
Report Abuse
FEATURES
Panel mounting/small-sized thin type controller (DIN144X144).
Generator operation unit no. (up to 8 units at max.) can be dealt with.
Most suitable for the system w/possible extension(1 unit is used for each generator).
Safe operation can be realized in line with system as setting/changeover of operating condition is simple.
Safe controller w/ synchronous check relay, receiving reverse power prevention, generator overload prevention.
Need more info ?
Generator Digital CONTROLLER Automatic Generator Controller AGC-300
Daiichi Electronics Co., Ltd.
Supplier Information
- Store Name: Daiichi Electronics Co., Ltd.
- Vendor: Daiichi Electronics Co., Ltd.
- Address:
- Electrical Measuring Instruments, Measuring Instruments, Testing Instrument & Equipment
Power Line Super Multi Meter SQLC-110L – Daiichi Electronics Co. Ltd.
Electrical Measuring Instruments, Measuring Instruments, Testing Instrument & EquipmentPower Line Super Multi Meter SQLC-110L – Daiichi Electronics Co. Ltd.
High spec class multi-function.Can measurement all electric power line (A,V,Kw, kvar, PF, Hz etc), harmonic and earth leakage.
A single unit can measure and monitor current demand x 3, voltage x 3, current x 3, power demand, power, reactive power, power factor, frequency, watt-hour, reactive power, harmonics (voltage, current), and leakage current (Io, Ior). It is applicable to various applications such as measurement and monitoring of power receiving circuits from low voltage to high voltage circuits, energy saving power monitoring, demand current measurement and monitoring, harmonics monitoring, and leakage current monitoring.
Centralized monitoring can be tailored to the system by adding analog and pulse outputs. Three-phase 3-wire, single-phase 3-wire, and single-phase 2-wire systems are shared, and 3-phase 4-wire systems can be switched using the 2VT3CT/3VT3CT settings.
SKU: n/a - Electronic Components, Relay
Digital Ground Fault Overvoltage and Reverse Power Relay DVRR-72 – Daiichi Electronics Co. Ltd.
Electronic Components, RelayDigital Ground Fault Overvoltage and Reverse Power Relay DVRR-72 – Daiichi Electronics Co. Ltd.
Necessary for Photovoltaic Power Generation Integrated measurement and protection
Protection relay integrating RPR, OVGR, instrumentation (multimeter), and backup power supply required for photovoltaic power generation equipment. It contributes to system construction with the industry’s most compact size. The OVGR is a top-class multimeter for load-following control in self-consumption photovoltaic power generation systems, with a fast response time (100 ms or less), enabling reductions in power costs and efficient use of energy.
The system is also easy to install, shortening the construction period for additional installation in existing facilities.
SKU: n/a - Electronic Components, Module
Automatic synchronizer ASY – Daiichi Electronics Co. Ltd.
Smooth synchronizing
This product is an automatic synchronizer w/ synchronous validation display(LED) used when generators are connected in parallel. Smooth synchronizing can be performed w/ suppressed rush current, less system disturbance, less generator shock by accurate circuit breaker closing at synchronizing point after matching voltage/frequency of both generators.
SKU: n/a - Electrical Measuring Instruments, Measuring Instruments, Testing Instrument & Equipment
MULTI-TRANSDUCER QT2-500 – Daiichi Electronics Co. Ltd.
Electrical Measuring Instruments, Measuring Instruments, Testing Instrument & EquipmentMULTI-TRANSDUCER QT2-500 – Daiichi Electronics Co. Ltd.
Comply with International Standard Multi Transducer
This QT2-500 multifunction transducer is used for measuring and monitoring of all single phase and three phase electric power system. Measurements of instantaneous values of more than 50 quantities (U, I, P, Q, S, PF, f, cos, THD etc.)
This QT2-500 support standard with Modbus RS485 communication and has up to 10 Analog outputs which can be set idividually. It is possible to stock DAIICHI transducer for future intallation or reconfiguration.SKU: n/a