Pump
Showing all 2 results
-
Industrial Machinery, Pump, Tools & Hardware
Dry Screw Vacuum Pump DSP251 / DSP501 – Osaka Vacuum Ltd.
Industrial Machinery, Pump, Tools & HardwareDry Screw Vacuum Pump DSP251 / DSP501 – Osaka Vacuum Ltd.
Small-size, light-weight, and easy to carry.
- Clean Vacuum
No oil back-streaming to the chamber. - Maintenance Free
No time gear means no lubricating oil to be maintained.
Maintenance free due to no chip seal change or oil change is required. - Air-Cooled Type
No utility required other than the electricity. - High-Speed Pump Down
Large pumping speed at close to atmospheric pressure range by the bypass line. - Energy Efficient
Low power consumption design.
SKU: n/a - Clean Vacuum
-
Industrial Machinery, Pump, Tools & Hardware
Air-cooled Dry Vacuum Pump FR060D – Osaka Vacuum Ltd.
-Enable operation from atmospheric pressure.
Volume flow rate is 800L/min at atmospheric pressure.
-Enable handing water vapor.
Vapor tolerance is 500g/hr.
-Reducing evaculation time.
Consatnt volume flow rate 800L/min over wide pressure range to ultimate pressure.
-Air cooling.SKU: n/a
Are you looking for a Pump product?
When selecting Pump for your company’s needs, there are several important points to consider during the comparison and evaluation process.
1. Pump Type
Identify the specific type of pump required for your application, such as centrifugal, positive displacement, diaphragm, or gear pump.
2. Flow Rate
Check the pump’s flow rate, which indicates the volume of fluid it can move per unit of time, to ensure it meets your desired capacity.
3. Pressure Rating
Evaluate the pump’s pressure rating, which indicates its ability to handle the required system pressure.
4. Efficiency
Assess the pump’s efficiency, as higher efficiency pumps consume less power and lead to cost savings over time.
5. Material of Construction
Consider the materials used in the pump’s construction to ensure compatibility with the fluid being pumped and resistance to corrosion or wear.
6. Maintenance Requirements
Check the maintenance requirements of the pump, including frequency of servicing and availability of spare parts.
7. Reliability and Durability
Evaluate the pump’s reliability and durability to ensure it can withstand the demands of your application without frequent breakdowns.
8. Size and Weight
Consider the physical dimensions and weight of the pump, especially if space is limited or portability is required.
9. Noise Level
Assess the noise level produced by the pump, particularly in applications where noise reduction is essential.
10. Cost and Life Cycle
Compare the initial cost of the pump with its expected life cycle and maintenance costs to determine the overall cost-effectiveness.