, ,

Waterproof tester for Electronic Devices WPC6100P02/M/WO – RIGAKU AIHARA SEIKI CO.LTD


Ideal for waterproof testing of components that require airtightness.

Continuous measurement mode with low and high test pressure.
LCD display of test pressure, test time, and clock strain.
Standard setting 1 kPa unit pressure adjustment while viewing the LCD screen.
Measurement is possible as long as it is below the maximum workpiece dimensions.

Maximum measuring pressure 200 kPa (equivalent to 20 m depth).

*Standard strain sensor is the lower type.

Optional

Strain sensor upper type specifications

The maximum test pressure can be changed as an option.

  Maximum test pressure: 300 to 600 kPa specifications available

Three features of the WPC (strain detection method), which has been proven in the wristwatch industry, are targeted at electronic device products while maintaining the excellent reliability of the WPC (strain detection method).

Excellent feature #1

Equipped with a new ultra-lightweight, high-sensitivity strain sensor

Excellent feature #2

Excellent pressure control function under low pressure

Excellent feature #3

Easy setting of various workpieces in an interactive format

 

Mechanism Specifications

Leak detection method Strain measurement method using air pressure
Strain detection resolution 0.1μm
Strain detection contactor pressure Approx. 0.18N (18gw) Actual measured value. Strain sensor position: Standard type is lower type.
Number of simultaneously measured workpieces one (object)
Max. workpiece dimensions W110 D65 H40(mm) Maximum dimensions that can be mounted.

May vary slightly depending on the shape.

Pressurized capsule opening/closing mechanism manual Equipped with capsule drop prevention mechanism.
work-set mechanism manual Just place the workpiece.
pressure source Factory air 200 to 700 kPa Φ6 quick connectors
Dimensions Approx. W300 D470 H510 (mm) Maximum dimensions including protrusions.
mass Approx. 20kg
Standard accessories Power cable, user’s manual

USB cable

 

Electrical Specifications

display part Liquid Crystal Indicator Pressure display (kPa), strain display (μm), time display (seconds)
LED Lamp OK (pass judgment), NG (fail judgment), Ready (ready)
Operation Department PUSH switch START/STOP
function key Pressure setting, strain amount setting, judgment value, measurement time
external communication USB Interface Standard communication software included
power (button on TV, etc.) AC100~220V±10%, 50Hz/60Hz, 20VA
Usage environment Temperature 15~30℃
level of humidity 70%RH or less (with no condensation)

Measurement Specifications

Measuring pressure Min. to Max. 10kPa~200kPa Can be set (displayed) in 1 kPa increments, but no feedback control is performed and may vary depending on the workpiece, measurement environment, and conditions.
Setting resolution 10kPa±10%
Step-up time (max.) Approx. 12 sec. Measured values at supply pressure of 300 kPa and measurement pressure of 200 kPa.
Measurement Time Large leak detection 1 to 99 seconds
Small leak detection 1 to 999 seconds
Setup Unit 1 second
Exhaust time (max.) Approx. 20 sec. Actual measured value at 200 kPa measurement pressure.
Measurement Mode SC to PC continuous Automatically and continuously measures SC mode and PC mode according to setting conditions.
SC alone SC alone
PC alone PC stands for [pressure constant], pressure constant measurement mode.
Judgment value Small leak detection 0.1~99.9μm Leakage detection when restored above the determined value.
Large leak detection Distortion 1 to 999μm

Recovery rate 1 to 99

Leakage is detected when the image is not distorted by more than the judgment value or restored by more than the restoration ratio.
Measurement Mode Small leak detection 0.1μm
Large leak detection Distortion 1μm, restoration rate 1%.

Japan’s only manufacturer of “strain detection method” waterproof inspection equipment

Manufacture and sale of measuring instruments for waterproof inspection and testing.

Vendor Information

  • Store Name: RIGAKU AIHARA SEIKI CO.,LTD
  • Vendor: RIGAKU AIHARA SEIKI CO.,LTD
  • Address: 190-1222
    Tokyo Mizuho-machi 2-24 Hakonegasaki Higashimatsubara