VIBRO-CONVEYOR DRYER – Sugiyama Heavy Industrial
Continuous heating and drying of materials while vibratory conveying by introducing hot air into a double structure open-hole trough
Efficient, continuous heating is achievable by fluidizing the material with hot air.
Pulverization of the material and air exhaust can be conducted to remove fine particles.
Punching troughs can be chosen according to the target material.
VDE-10 Appearance
The photo shows the model used for evaporation and cooling of residual moisture of granules discharged from a spray dryer. In place of hot air, room temperature air is introduced for cooling. To prevent condensation in the upper casing, rubber heaters and heat insulators are installed on the production line.
Electric Hot Air Heater
Electric heater capacity and air flow rate are set according to the specific heat and moisture content of the material. Heaters can be expanded in 26 kW increments.
Trough Opening
Troughs: Various perforation rates can be selected according to the grain size of the material. Reinforcing frames are installed according to the trough opening, degree, and amount of material conveyed.
Feeder Trough: The feeder trough is supported by springs in the base, and two motors for vibration generation are fixed in the center, one on each side. The feeder trough and cushion springs resonate to produce a synchronized motion that transports the object.
Bottom of the Trough: The bottom of the trough has a double structure, and the trough surface where the material moves is perforated. Hot air is injected from the bottom of the trough, and the hot air that passes through the punched holes efficiently conducts heat while fluidizing the material layer to heat and dry the material. Exhaust air is discharged from the top of the trough. Two discharge ports can be provided for separate discharge of material from the top and bottom of the perforated trough.
Option
Airtight: The trough and the feeding and discharging lines are airtight, allowing for gas atmosphere displacement. The displacement gas is purged as hot air.
Aperture Ratio and Screen Opening Size: Aperture ratio and screen opening size are determined according to the particle size and shape of the material. Two discharge ports can be provided to classify and discharge material above and below the punching trough.
Electric Heater Unit: An electric heater unit is selected according to the specific heat and moisture content of the material.
THE POWDER TECHNOLOGY
SUPPORT WITH POWDER.
Sugiyama Heavy Industries Co., Ltd. is a powder technology company. Powder generation technology is indispensable in every industrial field. The range of applications includes ceramics, powder metallurgy, electronic materials, magnetic materials, inks, pigments, polymer materials, refractory materials, glass, foods, pharmaceuticals, agricultural chemicals, fertilizers, etc., and are used in a variety of B-to-B and B-to-C products.
We have continued to take on the challenge of researching and proposing materials and technologies that meet the needs of the times as we provide equipment and plants for all industries that handle powders and granules and chemical materials.
We will continue to support our customers and partners with our powder technology and contribute to the creation of society and future daily life beyond that.
Vendor Information
- Store Name: Sugiyama Heavy Industrial
- Vendor: Sugiyama Heavy Industrial
-
Address:
489-0003
Aichi Seto 970-2 Anada
-
Conveyor, Industrial Machinery, Screw Conveyor
SCREW CONVEYOR – Sugiyama Heavy Industrial
Material is continuously conveyed by rotating spiral blades. Supports various variations such as round or U-shaped troughs and multiple shafts.
Designing and manufacturing of special specifications such as multi-axial screws and tandem screws is available. Various surface treatments can be applied according to the material to be conveyed. Heating/cooling and atmosphere control can be provided according to the purpose of conveying. Different pitch blades can be utilized to adjust the bulk of materials during conveying.
SKU: n/a -
Conveyor, Industrial Machinery, Rubber Belt Conveyor, Vibrating Conveyor
BELT CONVEYOR – Sugiyama Heavy Industrial
Conveyor, Industrial Machinery, Rubber Belt Conveyor, Vibrating ConveyorBELT CONVEYOR – Sugiyama Heavy Industrial
Capable of transferring large quantities of material over long distances without applying external force to the material. The bottom of the belt is V-shaped to prevent material spillage during conveyance, and the belt with cleats can handle inclined conveyance.
Ideal for processing of horizontal conveying with small to large capacity. Its simple structure and low cost make it an attractive option. Various belt shapes, such as side skirt type, V type, pipe type, and with cleats, can be selected according to the material to be conveyed.
SKU: n/a -
Conveyor, Industrial Machinery, Vibrating Conveyor
VIBRATION CONVEYOR – Sugiyama Heavy Industrial
Vibration motor vibrates the trough, and the object is transported in synchronized motion by resonance with the cushion spring.
Through vibration, contact between the trough conveying surface and the material is reduced, thus decreasing contamination caused by conveying hot products and abrasion.
Vibratory conveying prevents excessive external force from being applied to the material being conveyed, allowing for the conveying of granules, pellets, etc. without powdering or breakage of grains.
A wide range of options are available, including an intermediate discharge mechanism and a classifying mechanism during conveying.SKU: n/a -
Conveyor, Industrial Machinery, Vibrating Conveyor
VIBRO-CONVEYOR FIR DRYER – Sugiyama Heavy Industrial
Conveyor, Industrial Machinery, Vibrating ConveyorVIBRO-CONVEYOR FIR DRYER – Sugiyama Heavy Industrial
Heating elements are mounted in the upper casing, and materials are continuously heated and dried while vibratory conveyance is performed.
Efficient, continuous heating is possible due to the fluidization of materials through vibration. Vibratory conveying prevents excessive external forces from being applied to the material being conveyed, thus enabling the conveying of granules, pellets, etc. without powdering or breakage of grains. The heater can be selected according to the target material.
SKU: n/a
Related products
-
Industrial Machinery, Packaging, Packaging Machines
FJ-500XL – VACUUM PACKAGING MACHINE – Nantsune Inc.
Industrial Machinery, Packaging, Packaging MachinesFJ-500XL – VACUUM PACKAGING MACHINE – Nantsune Inc.
Long term storage and packing with the same quantity, quality and taste, and even liquid.
LOW PRICE
●100V power supply specification!
●Comes with memory function!
●The software feature ensures that the product and the bag are undamaged and vacuumed.
●Easy and simple operation panel!SKU: n/a -
Industrial Machinery, Packaging, Packaging Machines
rice packing machine- NKC-01A – NOMURA CORPORATION
Industrial Machinery, Packaging, Packaging Machinesrice packing machine- NKC-01A – NOMURA CORPORATION
Automatic bag feeding type weighing and packaging machine for stand-up packs with zipper
Various options such as gas filling, oxygen absorber feeder, and print inspection equipment can be installed.
SKU: n/a -
Industrial Machinery, Packaging, Packaging Machines
rice packing machine- VACFORMER – MARUTAKA
Quick, easy, and clean “vacuum packaging” from vacuum degassing to seal completion
Anyone can easily vacuum pack sachet rice bags.
The special molding forming case enables vacuum forming of multiple pieces at one time. In addition, the flat bottom design makes cleaning and maintenance easy. Equipped with a high-performance vacuum pump, the machine can also vacuum pack other items than rice, such as beans and cereals.SKU: n/a -
Industrial Machinery, Packaging, Packaging Machines
rice packing machine- FLS-66 – NOMURA CORPORATION
Industrial Machinery, Packaging, Packaging Machinesrice packing machine- FLS-66 – NOMURA CORPORATION
6-position rotary type is adopted! Even faster operation!
The machine is designed to provide ample space, and a print image inspection device can be installed in the bag-making section, and a freshness preservation device (gas filling and degassing) can be installed in the optional rotary section.
The expandable design makes it easy to retrofit after delivery, contributing to the creation of “valuable products” that meet diversifying needs.SKU: n/a
