Which are you looking for?
VIBRATION CONVEYOR
, ,

VIBRATION CONVEYOR – Sugiyama Heavy Industrial

Compare

Vibration motor vibrates the trough, and the object is transported in synchronized motion by resonance with the cushion spring.

Through vibration, contact between the trough conveying surface and the material is reduced, thus decreasing contamination caused by conveying hot products and abrasion.
Vibratory conveying prevents excessive external force from being applied to the material being conveyed, allowing for the conveying of granules, pellets, etc. without powdering or breakage of grains.
A wide range of options are available, including an intermediate discharge mechanism and a classifying mechanism during conveying.

Conveyor Trough

The conveyor trough is supported by springs in the base, and two motors for vibration generation are fixed in the center, one on each side. The object is transported by the synchronized motion of the transport trough and cushion spring resonance. The excitation force is adjusted by the unbalanced weight of the vibration motors or the number of revolutions. The amplitude of the trough motion reduces contact between the trough surface and the material, resulting in less wear and less destruction and powdering of the material being conveyed.

Gas atmosphere replacement in the trough, wet conveying, intermediate discharge, and classification mechanisms can also be added.

Electromagnetic Vibration Type

Electromagnetic vibration type is also available, using an electromagnetic coil as the vibration source. For materials with high moisture content, vibration may cause leaching of moisture, so a conveyance test is required.

Intermediate Discharge Mechanism

An opening is provided at the bottom of the trough, and an intermediate discharge mechanism that opens and closes by cylinder drive can be configured. We can design it in consideration of the trough resonance point and layout. The trough and inlet/outlet lines can be hermetically sealed to allow for gas atmosphere replacement. The displacement gas is purged with a slight positive pressure. Decompression is also possible, but the trough must be reinforced in consideration of atmospheric pressure.

Classification Mechanism

Wire mesh or perforated plates can be installed in the trough to classify the material during transport. Classified products are discharged separately. Depending on the target particle size, we can select the wire mesh and design the support frame.

Heating Mechanism

Heating of conveyed material is possible by blowing hot air from the bottom of the trough or by installing a heater in the upper casing of the trough. We will design the system according to the heating temperature, conveying volume, specific heat of the material, moisture content, etc.

Other Models

We have a lineup of models other than those listed above. Each model has a capacity (m3/min), motor

Categories: , ,
Sugiyama Heavy Industrial
Sugiyama Heavy Industrial

THE POWDER TECHNOLOGY

SUPPORT WITH POWDER.

Sugiyama Heavy Industries Co., Ltd. is a powder technology company. Powder generation technology is indispensable in every industrial field. The range of applications includes ceramics, powder metallurgy, electronic materials, magnetic materials, inks, pigments, polymer materials, refractory materials, glass, foods, pharmaceuticals, agricultural chemicals, fertilizers, etc., and are used in a variety of B-to-B and B-to-C products.

We have continued to take on the challenge of researching and proposing materials and technologies that meet the needs of the times as we provide equipment and plants for all industries that handle powders and granules and chemical materials.

We will continue to support our customers and partners with our powder technology and contribute to the creation of society and future daily life beyond that.

Vendor Information

Related products