Rapid-Rate Thermal Cycle Chamber – ESPEC CORP.
High temperature rate of change with uniformity and reproducibility
The Rapid-Rate Thermal Cycle Chamber is ideal for test requiring quick changes 15°C/min ramp rate in specimen temperature and 23°C/min ramp rate for air temperature(temperature heat up average). It covers various applications from JEDEC, IEC standards to screening.
It features a built-in web application that can be used to operate the chamber from a PC or tablet.
This web application allows you to check the status of the chamber remotely using a web browser.
Features
Uniformity, reproducibility
Wind simulation allows achieving minimum temperature variations of the specimen, for accurate and quick temperature changes. Specimen temperature ramp rate is 15°C/min, air temperature ramp rate is 23°C/min(temperature heat up average).
Greater temperature ramp control
High precision of the specimen temperature control achieved thanks to a sensor for temperature specimen measurement, and the embedded high-speed controller.
In addition:
- refrigeration capacities increased at low temperatures,
- minimization of the difference between test area and specimen temperatures,
- airflow speed uniformity,
lead to excellent temperature ramp control.
Selection of the temperature control mode
Two temperature control modes are available:
- A specimen temperature control mode meeting ramp rate conditions of JEDEC standard (15°C/min.)
- An air temperature control mode for temperature cycle tests.
Free access
Cable ports are equipped on both left and right side, to ease specimen access and wiring.
Ramp rate input available(patent pending)
The step t ime can be calculated automatically just by inputting the ramp rate.
Multi-language support
You can change the language of the controller by pressing the Language icon and choosing the language. You can select from Japanese, English, Tradit ional Chinese, Simplified Chinese, and Korean.
Email alarm notification
Details on alarms that have been triggered will be sent to pre-registered e-mail addresses. It is also possible to transmit e-mails when testing has finished.
Growing with the Evolution of Cutting-edge Technologies
World – leader in Environmental Test Chambers
ESPEC was founded in 1947, and in 1961 we became the first company in Japan to successfully develop environmental test chambers. Since then, we have continued to lead the industry as pioneers of environmental testing in Japan. We have also strived to expand ESPEC’s global reach with a focus on overseas markets from an early stage, and with the development of more advanced technologies, we have become the world’s leading environmental test chamber manufacturer.
Need more info ?
Rapid-Rate Thermal Cycle Chamber TCC-151W Catalog
ESPEC CORP.
Vendor Information
- Store Name: ESPEC CORP.
- Vendor: ESPEC CORP.
-
Address:
530-8550
Osaka Osaka 3-5-6 Tenjinbashi
-
Hast Chamber, Testing Equipment, Testing Instrument & Equipment
Environmental Stress Chamber AR series – ESPEC CORP.
Hast Chamber, Testing Equipment, Testing Instrument & EquipmentEnvironmental Stress Chamber AR series – ESPEC CORP.
Line-up expansion with new models
AR series features wide temperature range and innovative control functions for demanding faster temperature cycling and damp heat test.
The programmable controller allows AR series to support an easy-to-use networking system.SKU: n/a -
Hast Chamber, Testing Equipment, Testing Instrument & Equipment
Bench-Top Type Temperature(& Humidity) Chamber – ESPEC CORP.
Hast Chamber, Testing Equipment, Testing Instrument & EquipmentBench-Top Type Temperature(& Humidity) Chamber – ESPEC CORP.
High performance in a compact design
Of a bench-top size that can fit on a personal desk, this small temperature and humidity chamber achieves high performance to fulfill your environmental testing needs.
The lineup including 12 models available in two sizes (22.5L and 64L) with a temperature range of -20, -40, or -60 °C to +150 °C for temperature tests or climate tests allow you to choose the performance best suited for your test applications.
In addition, the model with temperature change rate of 5K/min can meet requirement for fast cycling test from various industries.
Featuring a touch screen color display for easy operation, the controller carries the same function and design of the Platinous J chambers.SKU: n/a -
Hast Chamber, Testing Equipment, Testing Instrument & Equipment
Highly Accelerated Stress Test System (HAST Chamber) – ESPEC CORP.
Hast Chamber, Testing Equipment, Testing Instrument & EquipmentHighly Accelerated Stress Test System (HAST Chamber) – ESPEC CORP.
Creates tempreture, humidity and pressure environments to IEC60068-2-66 standard.
The Highly Accelerated Stress Test Chamber has been primarily developed to conduct bias testing which applies constant voltage and signals. The standard equipment features two control modes: [unsaturated control] and [wet saturated control], while the M-type chamber additionally offers a [wet and dry bulb temperature control] mode.
The M-type chamber conforms to the IEC60068-2-66 standard.SKU: n/a -
Hast Chamber, Testing Equipment, Testing Instrument & Equipment
Platinous J Series Temperature(& Humidity) Chamber – ESPEC CORP.
Hast Chamber, Testing Equipment, Testing Instrument & EquipmentPlatinous J Series Temperature(& Humidity) Chamber – ESPEC CORP.
Your best choice to cover board reliability test applications.
New refrigeration system “Smart R&D System” (patent no. 5514787)
An ESPEC original refrigerator system that delivers the high levels of energy savings and performanceMake your own chamber with a variety of options
Extended choice of options fitted to your testing. Select your chamber from the door, refrigeration system, instrumentation, language and so much more! Over 60 options to choose from; order only what you need.Network solutions
Control and monitor your chamber on-site or remotely, edit and transfer programs from one chamber to another, and receive email alerts even on your mobile.SKU: n/a
Related products
-
Testing Equipment, Testing Instrument & Equipment, Waterproof Testing Machine
Spray Tester – DAIEI KAGAKU SEIKI MFG. CO. LTD
Testing Equipment, Testing Instrument & Equipment, Waterproof Testing MachineSpray Tester – DAIEI KAGAKU SEIKI MFG. CO. LTD
DAIEI KAGAKU SEIKI MFG. CO., LTD provides reliable quality and technology.
Spray water on a specimen installed to 45 degree by a spray nozzle set in the height of 150mm, according to the JIS L 1092 of water proof test (spray test). Appraise the water resistance according to the surface moisture state.
SKU: n/a -
Hast Chamber, Testing Equipment, Testing Instrument & Equipment
Highly Accelerated Stress Test System (HAST Chamber) – ESPEC CORP.
Hast Chamber, Testing Equipment, Testing Instrument & EquipmentHighly Accelerated Stress Test System (HAST Chamber) – ESPEC CORP.
Creates tempreture, humidity and pressure environments to IEC60068-2-66 standard.
The Highly Accelerated Stress Test Chamber has been primarily developed to conduct bias testing which applies constant voltage and signals. The standard equipment features two control modes: [unsaturated control] and [wet saturated control], while the M-type chamber additionally offers a [wet and dry bulb temperature control] mode.
The M-type chamber conforms to the IEC60068-2-66 standard.SKU: n/a -
Testing Equipment, Testing Instrument & Equipment, Waterproof Testing Machine
Waterproof tester for Electronic Devices WPC6540P10/A – RIGAKU AIHARA SEIKI CO.LTD
Testing Equipment, Testing Instrument & Equipment, Waterproof Testing MachineWaterproof tester for Electronic Devices WPC6540P10/A – RIGAKU AIHARA SEIKI CO.LTD
Ideal for waterproof testing of components that require airtightness.
One strain sensor circuit in each capsule.
Smartwatches with bands can also be measured.
Maximum measuring pressure of 950 kPa (equivalent to 95 m depth).
Low pressure can be set in 1 kPa steps, so that even workpieces that are easily deformed by pressure can be measured.
Stable leak detection at optimum test pressure even for workpieces that are easily deformed by pressure.
Measurement is possible simply by changing the bracket that matches the shape of the workpiece.
measurement is possible by simply changing the bracket that matches the shape of the workpiece, thus minimizing running costs.
High inspection accuracy can be achieved by using three different measurement modes.
High-precision leak detection for both low pressure and high pressure by using 3 different measurement modes.
The same inspection conditions can be applied to different shapes of workpieces.
SKU: n/a -
Testing Equipment, Testing Instrument & Equipment, Waterproof Testing Machine
Waterproof tester WPC8051P10 – RIGAKU AIHARA SEIKI CO.LTD
Testing Equipment, Testing Instrument & Equipment, Waterproof Testing MachineWaterproof tester WPC8051P10 – RIGAKU AIHARA SEIKI CO.LTD
This highly sensitive water resistance tester is indispensable for water resistance testing of quartz watches as well as high-end mechanical watches.
The WPC8050 is a waterproof tester for large wristwatches and airtight products using the air-pressure strain measurement method. Like the WPC8050, this model has excellent performance functions and can be used for final waterproof testing. It is equipped with a two-stage continuous measurement mode and has a high leakage determination rate.
SKU: n/a
