, ,

Full-automatic Autoclave with Drying Function HRH – HIRAYAMA Manufacturing Corporation


Horizontal Autoclave with One-touch Lid Interlock System

Clean drying without contamination
Pre-vacuum air removal using a vacuum pump
Electro-mechanical lid lock system
Dual interlock mechanism
Dual detection system for residual air

Features & Functions

Clean drying without contamination
After sterilization, drying is performed with the lid closed.
Clean drying can be carried out without worry of contamination.

Pre-vacuum air removal using a vacuum pump
A vacuum pump is installed to remove residual air with vacuum.
This is effective when sterilizing objects put in containers or bags from which air is difficult to escape.

Electro-mechanical lid lock system
The lid can be opened and closed easily and reliably with the one – touch lever.
A pressure seal method is used as a safety measure.

Dual interlock mechanism
The lid is locked by dually detecting the chamber pressure and chamber temperature during operation.
The lock state is maintained even if an operation is manually interrupted.

Dual detection system for residual air
The residual air which may cause sterilization failure is dually detected to always maintain the appropriate sterilization conditions for loads. ※The residual air is detected at the process before pressurization (during operation of an air removal timer) and at the process of pressurization air exhaust.

Power saving design
By reducing power consumption, we can provide more ecological and economical devices. (Its power consumption is approximately 2 / 3, compared with our former autoclave.)

Display panel

Operation cycle of each mode

Options for upgrading a system

Floating sensor Recorder Printer Automatic
water supply from tank
A sterilization timer operates after the temperature of the materials to be sterilzed reaches the set temperature. (Image is a chart type recorder.)
・Chart type recorder: 6-point dotting
・Hybrid recorder: 8-point dotting
※Chart width: 100 mm
※Class 2 T-type thermocouple included
※Thermal print type Manual water supply to the chamber becomes unnecessary.

Option

Square wire basket, stainless steel Plate-bottomed basket, stainless steel Round dressing drumstainless steel
W380 x D280 x H240 mm W380 x D280 x H240 mm [Small]
φ170 x H120 mm[Medium]
φ200 x H150 mm

[Large]
φ260 x H180 mm

“STERILIZING SIMPLY AND WELL”

Since its foundation in 1924, we have continued to pursue the fields of medical and scientific equipment for 90 years, with various sterilizations, incubators, and highly accelerated stress test chambers as our main products.

Need more info ?

HICLAVE HRH-110 HRH-110 Full-automatic Autoclave with Drying Function

HIRAYAMA Manufacturing Corporation

View Catalog

Vendor Information