, ,

Belcon Mini III Standard type DMH – Okura Yusoki Co. Ltd.


General-purpose type suitable for basic small item conveyance.

Enhanced eco-friendliness, safety, and maintenance, all in a compact body.

Report Abuse

Specifications

This model is the DMH (Center drive standard) with a nominal width of 30mm. The actual belt width is 297mm, the frame width is 345mm, and the machine length is between 55cm and 1,200cm. The standard belt is a resin flat belt (1 ply) with an end pulley diameter of φ27.2. The drive unit type is D: with bottom, and the direction of the drive unit is R: right side in conveying direction. The speed symbols, controller mounting direction, and motor output can be found in the “Speed Symbols/Conveyor Speed Table” and “Guideline of Conveyance Capacity”. The input power supply is 100V single-phase, 200V single-phase, or 200V three-phase. The conveying capacity is up to 50kg/unit.

High-speed Specification

When the machine length exceeds 400cm, the belt width is 7mm narrower than the actual belt width. The machine length for the high-speed specification is limited to 400cm. The drive unit type for the high-speed specification is D: with bottom only. The motor output of the high-speed specification is 90W. F and G stand for Mitsubishi and Toshiba, respectively.

Connected to the Next

Propose The Best Solution.
OHKURA Material Handling System” accelerates automation of logistics sites and promotes labor and manpower saving.
Realizes stable operation and efficient logistics.

Supplier Information

  • Store Name: Okura Yusoki Co., Ltd.
  • Vendor: Okura Yusoki Co., Ltd.
  • Address: 675-8675
    Hyogo Kakogawa 900 Furuouchi
    Noguchi-cho

Specifications

This model is the DMH (Center drive standard) with a nominal width of 30mm. The actual belt width is 297mm, the frame width is 345mm, and the machine length is between 55cm and 1,200cm. The standard belt is a resin flat belt (1 ply) with an end pulley diameter of φ27.2. The drive unit type is D: with bottom, and the direction of the drive unit is R: right side in conveying direction. The speed symbols, controller mounting direction, and motor output can be found in the “Speed Symbols/Conveyor Speed Table” and “Guideline of Conveyance Capacity”. The input power supply is 100V single-phase, 200V single-phase, or 200V three-phase. The conveying capacity is up to 50kg/unit.

High-speed Specification

When the machine length exceeds 400cm, the belt width is 7mm narrower than the actual belt width. The machine length for the high-speed specification is limited to 400cm. The drive unit type for the high-speed specification is D: with bottom only. The motor output of the high-speed specification is 90W. F and G stand for Mitsubishi and Toshiba, respectively.

Connected to the Next

Propose The Best Solution.
OHKURA Material Handling System” accelerates automation of logistics sites and promotes labor and manpower saving.
Realizes stable operation and efficient logistics.

Supplier Information

  • Store Name: Okura Yusoki Co., Ltd.
  • Vendor: Okura Yusoki Co., Ltd.
  • Address: 675-8675
    Hyogo Kakogawa 900 Furuouchi
    Noguchi-cho