Which are you looking for?
, ,

Bakery Molder RMD-300W – REMACOM CO.LTD.

Compare

Forming speed of 1 ball is 0.5 seconds!
Greatly improves the efficiency of degassing, dough shaping, and roll forming!

The forming speed of one ball is 0.5 seconds, and about 1,800 pieces can be formed in an hour with the gas release roll forming capability, thus shortening the working time!
The large two-stage rollers allow for firm degassing without damaging the dough.
The rollers are made of stainless steel for clean use, so there is no need to worry about rust or peeling of plating.

Features

One-touch changeover to suit your application

Equipped with a conveyor belt reversing device for “flattening
In addition to bar roll forming for bread and dock bread, the conveyor belt is equipped with a reversing device that enables “flattening,” which is necessary for forming wrapped sweet buns.
Large two-stage roller for venting without damaging the dough
Two large rollers with a diameter of 94 mm and an effective width of 230 mm are installed to vent large dough without damaging it.
Roller spacing can be adjusted from 1mm to 15mm.

Efficient work line!

The hand flour bin, which holds flour for beating, is placed on top of the main unit for easy access.
Also, the banjou, which holds the dough, can be set to reduce movement, allowing for efficient operation.

Easy operation for everyone!

1. Align the forward/reverse levers.

After connecting the power cord, set the FWD/REV lever.
Roll Forming] (FWD)
Set to [F] so that the conveyor belt rotates toward the back guard side.
Flat Forming] (REV)
Set the conveyor belt to rotate toward the receiving side in accordance with [R].
Set the roller interval.
While checking the scale on the top of the main unit, set the roller spacing with the pressure roller spacing adjustment dial. The interval can be set from 1mm to 15mm for each roller.
Lower roller】】
Scale on the far side viewed from the receiving pan
Upper roller
Scale on the front side viewed from the receiving pan.
Set the distance between the press plates.
Turn the press board elevation dial to adjust the distance between the conveyor belt and the press board.
This setting is omitted in the case of [flat pressing].
Turn on the [ON] switch and feed the dough into the feed port.
After dividing, rounding, and bench time have been completed, place the dough into the feed port.
5. When operation stops, pull out the tray.
When all processes are completed, the machine stops automatically. (During fully automatic operation)
After the operation stops, pull out the tray.

The cover is removable for easy cleaning.

Curl net and resin sheet
After use, be sure to remove the curl net and the resin sheet of the press plate, wash them, and dry them thoroughly before setting them on the main unit.

Rollers
The cover of the dough feeding section is removable for easy cleaning of the rollers.

Side gear section
The gear section on the side of the machine, where powder tends to accumulate, can be easily opened and cleaned for clean use.

Care and Maintenance
The conveyor belt should be dry and cleaned by brushing with a dry brush.
Do not brush the conveyor belt while it is still wet or with a wet brush, as this may cause electric shock.
Wipe the receiving pan with a wet cloth and then wipe it with a dry cloth.
Inspect the roller scrapers at least once a week.

Categories: , ,
REMACOM CO.,LTD.
REMACOM CO.,LTD.

We want to be a company that is needed by everyone
To always be needed by our users.

We have always wanted to be a company that is needed by consumers.
As a B-to-C company with the face of a manufacturer, we want to be a pioneer of a new era.
We will continue to contribute to the “dreams”, “hopes”, and “lives” of more and more customers and business owners through the development of kitchen equipment and the support business for opening new businesses.

All products manufactured and sold by Lemacom,
All products manufactured and sold by Lemacom have superior products and proven world-class safety.
Furthermore, Lemacom products are developed to be installed at the lowest possible cost with the lowest possible initial investment,
All products are competitively priced.
We will spare no effort to be an indispensable company for consumers all over the country,
We will always strive to be a company that is necessary to consumers throughout Japan, and we will continue to make management efforts with a pioneering spirit to pioneer a new era.
We will continue to make management efforts with a pioneering spirit that will always pioneer a new era.

Vendor Information

  • Store Name: REMACOM CO.,LTD.
  • Vendor: REMACOM CO.,LTD.
  • Address: 411-0822
    Shizuoka Mishima-shi Matsumoto

Related products