Industrial Machinery
Showing 1–24 of 50 results
-
Air Cooled Chiller, Cooling Refrigeration Equipment, Food & Beverage Machinery
Air-cooled chiller Matrix Advance (large capacity type) – Hitachi Global Life Solutions Inc.
Air Cooled Chiller, Cooling Refrigeration Equipment, Food & Beverage MachineryAir-cooled chiller Matrix Advance (large capacity type) – Hitachi Global Life Solutions Inc.
Air-cooled cold screw chiller unit with improved energy efficiency and control functions
Significant reduction in annual power consumption.
(In the case of a 100 horsepower equivalent, approximately 19/22% reduction (50/60 Hz) compared to conventional models.
SKU: n/a -
Electronic Components, Module
Beam profiler for large diameter and high-power: LaseView-LHB – Kokyo Inc.
Electronic Components, ModuleBeam profiler for large diameter and high-power: LaseView-LHB – Kokyo Inc.
Equipped with different analysis capabilities, it is a very easy-to-use beam profiler.
LaseView-LHB is a laser beam profiler for large diameter and high power laser beams working on Windows systems.Thanks to a newly-developed optical setup, it is the first product to provide measurements for both large diameter and high power laser beams. This versatile lone product offers a wide range of applications.
It works with the LaseView software, which is known for its great usability.SKU: n/a -
Bearings, Industrial Machinery, Power Transmission
Bearing Units Stainless Series – NTN Corporation
This new series from NTN provides corrosion resistance and longer lubrication life in a clean unit with low torque characteristics.
Units combining a stainless steel housing and stainless steel ball bearings with improved corrosion resistance over general cast iron units. Heat-solidifying grease (polylube) in the ball bearings provide a clean environment and lower rotational torque.
SKU: n/a -
Bearings, Industrial Machinery, Power Transmission
Bearing Units with Ductile Cast Iron Housing Series – NTN Corporation
Bearings, Industrial Machinery, Power TransmissionBearing Units with Ductile Cast Iron Housing Series – NTN Corporation
The NTN ductile series helps with design optimization.
When compared with the standard NTN housing the ductile series housing enjoys a 40% weight reduction . Additionally the housing is useful for a size reduction in machine equipment. This is achieved by minimizing as much as possible non-critical dimensions of the housing allowing the housing to be placed in tight locations.
SKU: n/a -
Conveyor, Drag Chain Conveyor, Industrial Machinery
CDM’s Drag Chain Conveyor – CDM Systems Inc.
Two Types of Drag Chain Conveyors for a Wide Range of Material Handling Industries
Drag chain conveyors are the most effective way to move or elevate bulk material and transfer it from one point to another. The design, layout configurations, service duty rating, size of the drive, and type of chain and flight assembly all play a major role in determining the quality, durability and longevity of any given drag conveyor.
SKU: n/a -
Electronic Components, Module
Center Hall Thermo-electric Modules – Ferrotec Power Semiconductor Japan Corp.
Electronic Components, ModuleCenter Hall Thermo-electric Modules – Ferrotec Power Semiconductor Japan Corp.
Ferrotec, a manufacturer of thermo-electric modules and assemblies, was founded in the late 1980s.
Standard line-up of Thermo-electric Modules created according to customer requirements
SKU: n/a -
Cooling Refrigeration Equipment, Food & Beverage Machinery, Water Chillers
Choice Chiller Water-Cooling – AMU Reinetsu Company Limited
Cooling Refrigeration Equipment, Food & Beverage Machinery, Water ChillersChoice Chiller Water-Cooling – AMU Reinetsu Company Limited
Highly portable and high cost performance
This is a water-cooling, all-in-one type chiller, with various specification options.
Control within ±0.02°C has been realized.
Equipped with a high performance energy saving heating function utilizing the heat of the freezer.
Change to the wide-range specification is possible (from -30°C to 90°C).
Pumps (their flow rate and liftings) can be customized according to the facilities.
Production in pure-water specification, with all part contacting liquid made of SUS, is possible.
Change to the low-noise pulsation-reduced pump is possible.
SKU: n/a -
-
Experiments & Testing Glass, Glass Manufacturer, Lens
CLS SERIES Lens – Kowa Optronics co. Ltd.
3CCD LARGE FORMAT
Feature
For industrial 3CCD color line scan camera
Ultra high resolution
For use with 30mm length line sensor
Low chromatic aberration
Excellent corner brightness
Close up lens is available for close distance applicationsSKU: n/a -
Industrial Laser Equipment, Industrial Machinery, Laser Equipment Parts
CuW submounts – TECNISCO LTD.
Industrial Laser Equipment, Industrial Machinery, Laser Equipment PartsCuW submounts – TECNISCO LTD.
This CuW submount is used as a heat sink for high power LD modules.
Alignment with LD, and sharp edge and control of warpage for effective thermal conductivity are available.
Redundant solder can be controlled in AuSn vapor deposition on the LD bonding area.SKU: n/a -
Egg Sorting Machine, Food & Beverage Machinery, Sorting Equipment
Egg grading machine Omnia PX – MOBA Group
Egg Sorting Machine, Food & Beverage Machinery, Sorting EquipmentEgg grading machine Omnia PX – MOBA Group
With the Omnia PX series, Moba sets a new standard within the industry regarding three important goals for egg producers.
Due to the latest innovations, the Omnia PX also offers an extremely broad range of capacities, ranging from 45,000 eggs/hour to 255,000 eggs/hour.
SKU: n/a -
Electronic Components, Other Electronic Components
Flow Meters for Fluid – FUJI ELECTRIC CO. LTD.
Fuji Electric delivers high performance ultrasonic Flow Meters to optimized for 0.5-inch to 234-inch pipe diameters.
The portable ultrasonic flow meter is ideal for flow surveys, verifications, and energy/BTU measurements. The fixed unit offers high performance measurement in a versatile and easy to setup package. The Duosonics model is a hybrid pulse doppler-transit time unit for irregular profiles, non-Newtonian flows, and applications lacking sufficient upstream/downstream straight run mounting requirements.
SKU: n/a -
Industrial Machinery, Mechanical Accessories, Other Mechanical Accessories
Green Frame/Green Frame Yellow – SUS Corporation
Industrial Machinery, Mechanical Accessories, Other Mechanical AccessoriesGreen Frame/Green Frame Yellow – SUS Corporation
GF Series standard frame (28 mm) is a universal type, balancing function and strength.
Can be cut as short as 30mm
Cut size unit of 0.1 mm is possible (Cutting tolerance is±0.5 mm)
Non Alumite also available (Silver only)SKU: n/a -
-
Food & Beverage Machinery, Meat & Fish Machinery, Meat & Fish Slicer
HIGH SPEED AUTOMATIC BAND SAW NAB-250 HADES – Nantsune Inc.
Food & Beverage Machinery, Meat & Fish Machinery, Meat & Fish SlicerHIGH SPEED AUTOMATIC BAND SAW NAB-250 HADES – Nantsune Inc.
Safety, excellent yield, beautiful slicing
Proprietary two-step chucking mechanism
Counter plate pushes the remaining meat for a final slice to minimize the thickness of residual meat down to 15mm
Unique conveyor control enables shingles discharge
Automatically adjusts the tension of the blade and also has a load detection function
Safety-conscious two-hand push switchSKU: n/a -
Cleaning Equipment, High-pressure Cleaner, Industrial Machinery, Window Cleaning Machine
HIGH-PRESSURE WASHER HD 7/14-4 M – Alfred Karcher SE Co. KG
Cleaning Equipment, High-pressure Cleaner, Industrial Machinery, Window Cleaning MachineHIGH-PRESSURE WASHER HD 7/14-4 M – Alfred Karcher SE Co. KG
Innovative and efficient, our high-pressure washer offers outstanding mobility and flexible operation. With easy-to-use features like the EASY!Force gun and EASY!Lock couplings, cleaning has never been faster or more effortless. Protect your components and increase energy efficiency with our automatic pressure relief and 3-piston axial pump.
The HD 7/14-4 M high-pressure washer is a mobile and unheated cleaner that comes with various innovative features to ensure safe and comfortable working. The automatic pressure relief feature protects high-pressure components during standby mode, while the EASY!Force high-pressure gun and EASY!Lock quick-release couplings make handling five times faster than conventional screw connections. The machine is suitable for both vertical and horizontal operation, increasing its flexibility in use. The 3-piston axial pump with brass cylinder head increases cleaning power and energy efficiency by approximately 20%. The machine also offers numerous options for stowing and storing accessories, making it easy to transport and service-friendly. Overall, the HD 7/14-4 M is a high-quality and efficient cleaning solution for various industrial applications.
SKU: n/a -
Blowers, Industrial Machinery, Refrigeration & Heat Exchange Equipment
HIGH-TEMPERATURE & HIGH-PRESSURE STEAM FORCE FEED BLOWER – Yotsuba Air Machine Manufacturing Co. Ltd
Blowers, Industrial Machinery, Refrigeration & Heat Exchange EquipmentHIGH-TEMPERATURE & HIGH-PRESSURE STEAM FORCE FEED BLOWER – Yotsuba Air Machine Manufacturing Co. Ltd
Special type Roots blowers for high-temperature and high-pressure gas/steam gas force feeding for new-generation fuel-cells by exploring unlimited possibilities in high-temperature and high-pressure technologies
YOTSUBA has long been directing its efforts to the research of Roots blowers for high-pressure gas circulation and force feeding, as well as the vacuum technology.
SKU: n/a -
Industrial Machinery, Mechanical Accessories, Pneumatic Parts
Hydraulic and Pneumatic Cylinders – Nabtesco Service Co. Ltd.
Industrial Machinery, Mechanical Accessories, Pneumatic PartsHydraulic and Pneumatic Cylinders – Nabtesco Service Co. Ltd.
Efficient and Customizable Hydraulic and Pneumatic Cylinders for Industrial Machinery. Wide range of sizes and mounting options available to fit your specific needs.
Our product, “Hydraulic and Pneumatic Cylinders,” is a reliable and essential component for various industrial machines. With a proven track record of successful deliveries to different industries, we offer custom design options to meet each client’s specific needs. Our cylinders are designed to optimize machine efficiency and reduce labor costs. We can also provide support for designing accompanying systems. Our pneumatic cylinders can be produced in various diameters, ranging from φ40 to φ400, with different mounting options available. On the other hand, our hydraulic cylinders can be produced in various diameters, ranging from φ40 to φ800, with different mounting options available. Choose our cylinders for a reliable and efficient solution to your industrial machinery needs.
SKU: n/a -
Industrial Laser Equipment, Industrial Machinery, Laser Equipment Parts
Insulation type Cu-AlN-Cu submounts – TECNISCO LTD.
Industrial Laser Equipment, Industrial Machinery, Laser Equipment PartsInsulation type Cu-AlN-Cu submounts – TECNISCO LTD.
This is a heat sink for high-power LD (Laser diode) modules.
Three-layer composition achieves both high thermal conductivity and insulation quality. Control of Cu plating thickness makes the heat sink match with the LD, resulting in higher power and longer life of the LD module. Because pullback is not required on the critical edge area, it has a high degree of freedom in designing. Moreover, it can be applied to a variety of application by this freedom in design.
SKU: n/a -
